User manual

The following is an example of a typical network router LAN configuration page. One

typically accesses the LAN settings via a web browser and enters the router's IP address.

In this example, it is 192.168.2.1.

Figure 7

This is the IP address of the router. Entering 192.168.2.1 into a web browser will access

the displayed router settings pages shown. The first three numbers will need to be the

same as those on the Calmotion LANCNC-RMT devices. The last number can be

considered the device number. The router is 1. Computers will be provided a number

from 2 to 100, and the Calmotion LANCNC will need to have a number from 101 to 254.

This is the subnet mask. This should never be changed.

These settings will provide 99 IP addresses to the DHCP so that 99 computers can

automatically get an IP address from the router’s DHCP. It also frees up IP addresses

from 101 to 254 so that can be used by static IP address devices such as the Calmotion

LANCNC-RMT.

- 20 -