User manual

Usage

(continued)

Enable AutoScan mode

In AutoScan mode, the OmniView

™

MATRIX remains on one port for a number of seconds, before switching to the

next. This time interval is set in the On-Screen Display menu.

NOTE: There is no mouse or keyboard control in this mode. This is necessary to prevent errors. Otherwise, if the user

is moving the mouse or using the keyboard when the OmniView

™

MATRIX switches to the next port, data

flow is interrupted and will cause erratic mouse movement and/or the wrong characters to show up when

using the keyboard.

To get out of AutoScan mode, press the SPACEBAR.

On-Screen Display Menu Control:

Enable the On-Screen Display Menu

To get into the On-Screen Display (OSD) menu, press SCROLL LOCK, SCROLL LOCK, SPACEBAR. Immediately, the

OSD overlay screen appears. This screen is generated by the OmniView

™

MATRIX, and does not affect your computers

or running software in any way.

CONSOLE

Keyboard,

mouse and

monitor

Bank 1 (slave)

Bank 2 (slave)

etc...

Bank F (slave)

12345678

9 10111213141516

17 18 19 20 21 22 23 24

121 122 123 124 125 126 127 128

AutoScan Mode:

Bank 0 (Master)

F1D208-OSD_EU_man.qxd 4/20/00 4:37 PM Page 12