User manual

TROUBLESHOOTING

USB – (F1DS102T, F1DS104T) only

I am connecting my computer to the USB SOHO Series KVM

Switch via USB and my keyboard and mouse do not work.

• Prior to connecting the USB SOHO Series KVM Switch, make sure

that the HID USB driver is installed on each computer. (To install

the HID USB driver, connect a USB mouse and USB keyboard to

the computer. Windows should automatically install the drivers.)

Some of the keys on my keyboard are not functioning properly

when I use a Mac.

• Because you are using a PC keyboard on a Mac, a few of the

option keys on your PC keyboard may be reversed. All major keys

will function as labeled.

AUDIO AND MICROPHONE

I have connected the speakers to the KVM and I am not getting

any sound from my computer.

• Check that the sound is enabled on the computer by going into the

system setting.

• Check that the volume is turned up in your sound configuration.

• Make sure that the audio cable is connected properly and

connected to the appropriate connector.

• Check that the speakers you are using are functioning properly.