User manual

USING YOUR SOHO SERIES KVM SWITCH
22
You can switch directly to any port by entering the PORT number of
the port you wish to use. For example, if you press [SCROLL LOCK],
[SCROLL LOCK], [2], the computer on port 2 will be selected.
AutoScan Mode
In AutoScan mode the SOHO Series KVM Switch remains on one port
for 10 seconds before switching to the next. This time interval cannot
be changed.
To enable AutoScan mode press [SCROLL LOCK ], [SCROLL LOCK ],
[0], [0]
Note: There is no mouse or keyboard control in this mode. This is
necessary to prevent errors. Otherwise, if the user is moving the
mouse or using the keyboard when the KVM switches to the next
port, communication between the computer and KVM could be
interrupted and cause erratic mouse movement, or wrong characters
to display when using the keyboard.
To disable AutoScan mode, press the space bar.
Switch to port 2—#2 key
Enable AutoScan mode—#0 key
Switch to port 4—#4 key