User manual

Enhanced Wireless Modem Router

SECTIONSTable of Contents 1 2 3 4 5 7 8 9 106

USING THE WEB-BASED ADVANCED USER INTERFACE

For Static IP connection:

1. IP assigned by ISP – Select “No” if your ISP instructed you to use

fixed IP�

2. IP Address – Enter an IP address assigned by your ISP for the

Router WAN interface�

3. Subnet Mask – Enter a subnet mask assigned by your ISP�

4. Default Gateway – Enter a default gateway IP address assigned by

your ISP�

5. VPI/VCI – Enter your Virtual Path Identifier (VPI) and Virtual Circuit

Identifier (VCI) parameters here� These identifiers are assigned by

your ISP�

6. Encapsulation – Select the LLC or VC MUX your ISP uses�

Click “Apply Changes” to save and activate your settings� To go back to

the original settings before saving, click “Clear Changes”� Or click any of

the Quick-Navigation links for other options� Your new settings will not

be saved unless your click “Apply Changes”�

Setting your ISP Connection Type to Static IP (IPoA)

This connection type is also called “Classical IP over ATM” or

“CLIP”, which your ISP provides a fixed IP for your Router to

connect to the Internet�