User manual

Enhanced Wireless Modem Router

SECTIONSTable of Contents 1 2 3 5 6 7 8 9 104

CONNECTING AND CONFIGURING YOUR MODEM ROUTER

3. Locate the cable that connects your old modem to the ADSL wall

jack� Unplug it from your old modem and then connect it to the

gray port labeled “ADSL line” on the back of your Router�

4. Plug your Router’s power supply into the black port labeled

“Power” on the back of your Router�

5. Wait 20 seconds for the Router to start up� Look at the display on

the front of the Router� Make sure the “Wired” and “Router” icons

are lit in green� If they are not, recheck your connections�

1.2ReplacinganExistingModemorModemRouter

Follow these steps if you currently have a modem or a modem router

that you will be replacing with your new Router�

Important: Please unplug the power adapter of your old modem from

your wall outlet first.

1. Unpack your new Router from the box and place it next to your old

modem� Raise the Router’s antennas� Unplug your old modem’s

power cord�

2. Locate the cable that connects your old modem to your computer�

Unplug that cable from your old modem, and plug it into any yellow

port labeled “Wired” on the back of your new Router�

IMPORTANT: Run the Setup Assistant from the computer that is

directly connected to the Router from Step 1�1B�

ADSL