P74479ea_F5U235ea_uk.
P74479ea_F5U235ea_uk.
P74479ea_F5U235ea_uk.qxd 2/24/04 10:58 AM Page 3 TABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 System Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 Install the driver of USB-Infrared Smartbeam . . . . . . . . . . . . . . .3 Windows 98SE . . . . . . . .
P74479ea_F5U235ea_uk.
P74479ea_F5U235ea_uk.qxd 2/24/04 10:58 AM Page 1 INTRODUCTION Thank you for choosing the USB Infrared SmartbeamTM (USB-IrDA Adapter) from Belkin. The USB-Infrared Smartbeam supports FIR (4Mbps) and SIR (115200bps) baud rate to the infrared devices for example: mobile phone, PDA, printers, computers etc. The USB-Infrared Smartbeam is compliant with the USB 1.1 specification.
P74479ea_F5U235ea_uk.qxd 2/24/04 10:58 AM Page 2 OVERVIEW System Requirements • USB host controller (PCI or PCMCIA interface). • Windows 98SE/Me/2000/XP operating system. Package Contents • USB-Infrared Smartbeam • USB Extension Cable • User Manual • CD Note: Please review installation instructions fully before installation as installation differs under Windows 98SE.
P74479ea_F5U235ea_uk.qxd 2/24/04 10:58 AM Page 3 INSTALL THE DRIVER OF USB-INFRARED SMARTBEAM Windows 98SE 1. Insert the supplied CD Rom and then connect the USB-Infrared Smartbeam to the USB host controller of PC or Notebook. 2. Click “Next” to continue the driver installation. 3. Select “Search for the best driver for your device.” Click “Next” to continue.
P74479ea_F5U235ea_uk.qxd 2/24/04 10:58 AM Page 4 INSTALL THE DRIVER OF USB-INFRARED SMARTBEAM 4. Select “Specify a location” , click “Browse” then browse to the folder named “Drv98” on the supplied CD. Click “Next” to continue. 5. Click “Next” to continue.
P74479ea_F5U235ea_uk.qxd 2/24/04 10:58 AM Page 5 INSTALL THE DRIVER OF USB-INFRARED SMARTBEAM 6. You maybe required to enter your Windows 98SE CD, if requested please insert the Windows 98SE CD. Click “OK” to continue 7. Click “Finish” to complete the driver installation. 8. Once installation is complete you will need to restart your computer. Click “Yes” to restart your computer.
P74479ea_F5U235ea_uk.qxd 2/24/04 10:58 AM Page 6 INSTALL THE DRIVER OF USB-INFRARED SMARTBEAM 9. Move the cursor to the IRDA icon in the system tray near the clock. Click the mouse right button to select “Open” item. 10. Select “Options” item. Click “Enable infrared communication” check option to enable. Click “OK” to complete the setting and close the Infrared Monitor. Installation is now complete. Please enable the infrared on the device you wish to connect to.
P74479ea_F5U235ea_uk.qxd 2/24/04 10:58 AM Page 7 INSTALL THE DRIVER OF USB-INFRARED SMARTBEAM Windows ME 1. Insert the supplied CD and double click on “my computer”, then double click your CD rom drive. A list of files will be displayed. Double click the “SETUP.EXE” program file to install the USB-Infrared Smartbeam. 2. Click “Next” to continue. 3. Click “Next” to continue.
P74479ea_F5U235ea_uk.qxd 2/24/04 10:58 AM Page 8 INSTALL THE DRIVER OF USB-INFRARED SMARTBEAM 4. Click “Finish” to complete the driver installation. 5. Select “Yes, I want to restart my computer now”. Click “Finish” to reboot your computer. Once restarted connect the USB-Infrared Smartbeam into your USB port of your PC or Notebook.
P74479ea_F5U235ea_uk.qxd 2/24/04 10:58 AM Page 9 INSTALL THE DRIVER OF USB-INFRARED SMARTBEAM Windows 2000 1. Insert the supplied CD, double click on “my computer”, then double click your CD rom drive. A list of files will be displayed. Double click the “SETUP.EXE” program file to install the USB-Infrared Smartbeam 2. Click “Next” to continue 3.
P74479ea_F5U235ea_uk.qxd 2/24/04 10:58 AM Page 10 INSTALL THE DRIVER OF USB-INFRARED SMARTBEAM 4. Click “Finish” and then plug the USB-Infrared Smartbeam into the USB port of your PC or Notebook.
P74479ea_F5U235ea_uk.qxd 2/24/04 10:58 AM Page 11 INSTALL THE DRIVER OF USB-INFRARED SMARTBEAM Windows XP 1. Insert the supplied CD and double click on “my computer”, then double click your CD rom drive. A list of files will be displayed. Double click the “SETUP.EXE” program file to install the USB-Infrared Smartbeam. 2. Click “Next” to continue. 3. Click “Next” to continue.
P74479ea_F5U235ea_uk.qxd 2/24/04 10:58 AM Page 12 INSTALL THE DRIVER OF USB-INFRARED SMARTBEAM 4. Select “Continue Anyway” button to continue 5. Click “Finish” and then plug the USB-Infrared Smartbeam into the USB port of your PC or Notebook.
P74479ea_F5U235ea_uk.qxd 2/24/04 10:58 AM Page 13 INSTALL THE DRIVER OF USB-INFRARED SMARTBEAM 6. Select “Install the software automatically” and click “Next” to continue. 7. Click “Continue Anyway” button to continue.
P74479ea_F5U235ea_uk.qxd 2/24/04 10:58 AM Page 14 INSTALL THE DRIVER OF USB-INFRARED SMARTBEAM 8. Click “Finish” to complete the hardware installation.
P74479ea_F5U235ea_uk.qxd 2/24/04 10:58 AM Page 15 INSTALLATION Ensuring that the USB-Infrared Smartbeam is installed successfully under Windows 98SE/ME Right click “My computer”, select properties and then select “Device Manager”. Please ensure that the 4 highlighted entries are listed. If these are not listed, or installed with an exclamation mark please fully uninstall using instructions listed below.
P74479ea_F5U235ea_uk.qxd 2/24/04 10:58 AM Page 16 INSTALLATION Ensuring that the USB-Infrared Smartbeam is installed successfully under under Windows 2000/XP Right click “My computer” , select properties. Click “Hardware” , then select “Device Manager”. Please ensure that the USB-Infrared Smartbeam is listed as below.
P74479ea_F5U235ea_uk.qxd 2/24/04 10:58 AM Page 17 REMOVAL OF THE USB-INFRARED SMARTBEAM Windows 98SE/ME 1. Click start, control panel. Double click Add/Remove Programs Select the “USB-IrDA Adapter” and click “Add/Remove” to uninstall the driver. 2. Click “Yes” to uninstall the USB-Infrared Smartbeam.
P74479ea_F5U235ea_uk.qxd 2/24/04 10:58 AM Page 18 REMOVAL OF THE USB-INFRARED SMARTBEAM 3. You may see the message listed below, if so Click “Yes” to continue. 4. Select “Yes, I want to restart my computer now.
P74479ea_F5U235ea_uk.qxd 2/24/04 10:58 AM Page 19 REMOVAL OF THE USB-INFRARED SMARTBEAM Windows 2000/XP 1. Click start, then control panel and double click “Add/Remove Programs (for Windows 2000)” “Add or Remove Programs (for Windows XP)”and double click. Select the “USB-IrDA Adapter” item and click “Change/Remove” to uninstall the driver. 2. Click “Yes” to uninstall the USB-Infrared Smartbeam.
P74479ea_F5U235ea_uk.qxd 2/24/04 10:58 AM Page 20 REMOVAL OF THE USB-INFRARED SMARTBEAM 3. Click “Finish” and unplug the USB-Infrared Smartbeam.
P74479ea_F5U235ea_uk.qxd 2/24/04 10:58 AM Page 21 INFORMATION FCC Statement DECLARATION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMPATIBILITY We, Belkin Corporation, of 501 West Walnut Street, Compton, CA 90220, declare under our sole responsibility that the product: F5U235ea to which this declaration relates: Complies with Part 15 of the FCC Rules.
P74479ea_F5U235ea_uk.qxd 2/24/04 10:58 AM Page 22 Belkin Corporation 501 West Walnut Street Compton • CA • 90220 • USA Tel: 310.898.1100 Fax: 310.898.1111 Belkin Components, Ltd. Express Business Park Shipton Way • Rushden • NN10 6GL United Kingdom Tel: +44 (0) 1933 35 2000 Fax: +44 (0) 1933 31 2000 Belkin Components B.V.
