Network Router User Manual

33
Manually Configuring your Router
33
section
2
1
3
4
5
6
7
8
9
10
Setting WPA (with server) Settings
If your network uses a radius server to distribute keys to the clients,
use this setting.
1. From the “Security Mode” drop-down menu, select “WPA (with
Radius server)”.
2. Enter the IP address of the radius server into the “Server IP” fields.
3. Enter the radius key into the “Shared Secret” field.
4. Enter the re-key interval into the “Re-Key Interval” field. Re-key
interval is how often the keys are distributed (in packets).
5. Click “Apply Changes” to finish. You must now set up all clients
to match these settings.