Network Router User Manual

2726
Manually Configuring your Router
2726
Primary DNS Server – Enter the primary DNS server’s IP address
provided by your ISP.
Secondary DNS Server – Enter the secondary DNS server’s IP
address provided by your ISP.
VPI/VCI – Enter your Virtual Path Identifier (VPI) and Virtual Circuit
Identifier (VCI) parameter here (assigned by your ISP).
Setting your ISP Connection Type to Network Bridging
Enter the VPI/VCI value in the provided spaces, and then click “Next”.
This information is provided by your ISP.
VPI/VCI – Enter your Virtual Path Identifier (VPI) and Virtual Circuit
Identifier (VCI) parameter here (assigned by your ISP).
Encapsulation – Select LLC or VC MUX (assigned by your ISP).
Routing
From the “Routing” page, you can add, edit, and delete routing rules
from the routing table. You can create a new route by clicking the
“New Route” button.
Enter all the necessary information and click “OK” to add this new route.