Network Router User Manual

2524
Manually Configuring your Router
2524
Setting your ISP Connection Type to PPPoE or PPPoA
Enter the PPPoE (Point-to-Point Protocol over Ethernet) or PPPoA
information in the provided spaces, and click “Next”. This information
is provided by your ISP.
Click “Finish” to activate your settings.
User name – Enter the ISP assigned user name.
Password – Enter your password (assigned by your ISP).
VPI/VCI – Enter your Virtual Path Identifier (VPI) and Virtual Circuit
Identifier (VCI) parameter here (assigned by your ISP).
Encapsulation – Select your encapsulation type (supplied by your ISP)
to specify how to handle multiple protocols at the ATM transport layer.
VC-MUX – Point-to-Point Protocol over ATM Virtual Circuit Multiplexer
(null encapsulation) allows only one protocol running per virtual
circuit with fewer overheads.
LLC – Point-to-Point Protocol over ATM Logical Link Control allows
multiple protocols running over one virtual circuit (more overhead).
Setting your ISP Connection Type to Ethernet Connection over ATM (ETHoA)
Enter (ETHoA) information in the provided spaces, and click “Next”.
This information is provided by your ISP.