User manual

1514
Connecting your Router
1514
3. The Setup Wizard will start automatically for express
configuration (recommended) Click “Next” to continue.
Connecting your Router
4. The first step is to select your country and ISP, and click “Next”. If your
country and/or ISP is not listed, select “Other Country” or “Other ISP.”
5. Then select your connection type, PPPoE, PPPoA, or other types. For
the “PPPoE” or “PPPoA” you will see the following screen (opposite
page). Enter the required values provided by your ISP and click “Next”.
Note: For more detailed instruction on other connection types, please refer to
the “Manually Configuring your Router” section of this User Manual.