User manual

4948

Manually Configuring your Router

Schedule Rule

You may filter Internet access for local clients based on rules. Each

access control rule may be activated at a scheduled time. Define the

schedule on the “Schedule Rule”, and apply the rule on the “Access

Control” page.

Follow these steps to add a schedule:

1. Click “Add Schedule Rule”.

2. You will see the following screen.

3. To configure the schedule rule, specify the name, comment, start

time, and end time that you want to filter on your network.

4. Click “OK” and then “Apply Changes” to save your settings.

5. To complete this configuration, you will need to create or modify

an access rule in the Client IP filters section. This activates the

schedule for use in the “Access Control” page.