User manual

4746
Manually Configuring your Router
Manually Configuring your Router
47
Manually Configuring your Router
section
2
1
3
4
5
6
7
8
9
10
11
12
URL Blocking
To configure the URL blocking feature, specify the websites
(www.somesite.com) and or keywords you want to filter on your
network. Click “Apply Changes” to activate the change. To complete
this configuration, you will need to create or modify an access rule
in the “Client IP filters” section. To modify an existing rule, click the
“Edit” option next to the rule you want to modify. To create a new rule,
click on the “Add PC” option. From the “Access Control > Add PC”
section, check the option for “WWW with URL Blocking” in the “Client
PC Service” table to filter out the websites and keywords specified.