Belkin® Secure 2 port Flip DVI-D/VGA/DP KVM Switch User Manual Models: F1DN102V – Secure 2-port VGA KVM w/ audio and remote controller F1DN102F - Secure 2-port DVI-D single-link KVM w/ audio and remote controller F1DN102N - Secure 2-port DP KVM w/ audio and remote controller 8820-00773 Rev.
Table of Contents Section 1 - Introduction ................................................................2 Why use the Belkin Secure Flip KVM Switch? ............................... 2 Package Contents .......................................................................... 2 Section 2 - Overview ....................................................................3 Security Features ........................................................................... 3 Operational Features ........................
INTRODUCTION AND PACKAGE CONTENTS Table of Contents SECTIONS 1 2 3 4 5 6 Section 1 - Introduction Thank you for purchasing this 2 port Belkin Secure Flip KVM Switch. This Belkin Secure Flip KVM Switch is designed for use in secure environments across wide security gaps. This product provides the highest security safeguards and features, meeting current and future cyber prevention requirements. Important: This product is equipped with always-on active anti-tamper system.
OVERVIEW Table of Contents SECTIONS 1 2 3 Section 2 - Overview Security Features 5 6 7 USB Ports Protection Console USB ports are protected from the use of storage and other unsafe USB devices through strong filtering (independent of other computer protection means). Unqualified devices are rejected when connected to the Belkin Secure Flip KVM Switch. Only mouse and keyboard data are passed through.
OVERVIEW Table of Contents SECTIONS 1 2 3 5 6 7 No Memory Buffer Secure Packaging The lack of memory buffers prevents unintentional transfer of keystrokes or other data when switching between computers. “Tear away” packaging ensures secure delivery of the Switch as it is routed to the end user. The recyclable packaging also breaks down flat, simplifying the cleanup process.
OVERVIEW Table of Contents SECTIONS 1 2 3 4 5 6 7 No Cables required No cables are required with the Belkin Secure Flip KVM Switch as all cables are part of the product making it very easy to install. Operational Features The Belkin Secure Flip KVM Switch was designed with the user in mind for today’s IT environment. Below is a summary of some of the features incorporated into the product.
OVERVIEW Table of Contents SECTIONS 1 2 3 4 5 6 7 Equipment Requirements User Operating-System (OS) Support The Belkin Secure Flip KVM Switch is compatible with computers running on, the following OS platforms: Cables No cables are required with the Belkin Secure Flip KVM Switch as all cables are part of the product.
OVERVIEW Table of Contents SECTIONS 1 2 3 4 5 6 7 Safety Precautions • Please read the following safety precautions carefully before using the Belkin Secure Flip KVM Switch: If one of the following situations occurs, get the product checked by a qualified service technician: The product’s power supply is overheated, damaged, broken, causes smoke or shortens the main power socket. Liquid penetrates the product’s case. The product is exposed to excessive moisture or water.
OVERVIEW Table of Contents SECTIONS 1 2 3 5 Figure 4 – F1DN102F TOE front panel features Figure 5 – F1DN102V TOE Front panel features 8 Belkin® Secure 2 port Flip DVI-D/VGA/DP KVM Switch User Manual 4 6 7
OVERVIEW Table of Contents SECTIONS 1 2 3 4 5 Console USB Keyboard 2. Console USB Mouse 3. Console display output port 4. Display Status LED 5. DC Jack 6. Flip Remote controller jack 7. Console audio out jack 8. Channel #2 select illuminated push-button 9. Channel #1 select illuminated push-button 10. Computer interface cables 11. Flip Remote Controller - Channel selected Bi-color LED 12.
OVERVIEW Tamper Evident SECTIONS Label Table of Contents 1 2 3 The Belkin Secure Flip KVM Switch uses a holographic tamper evident label to provide visual indications in case of an enclosure intrusion attempt. These labels indicate white dots or the text “VOID” once removed. When opening product packaging inspect the four tampering evident labels. 4 6 7 Active Anti-Tampering System The Belkin Secure Flip KVM Switch is equipped with always-on active antitampering system.
OVERVIEW Table of Contents SECTIONS 1 2 3 Product Specifications Part No.: F1DN102N, F1DN102F, F1DN102V Enclosure: Impact resistance ABS plastic Power Requirements: 12V DC, 1.5A adapter with polarity AC Input Voltage: 100 to 240VAC No. of Users Supported: 1 No. of Computers Supported: 2 Console Keyboard Input: USB Type A Console Mouse Input: USB Type A Console Video Port Computer Audio Input plug: Computer Video Input plug: 7 3.
INSTALLATION Table of Contents SECTIONS 1 2 3 Section 3 - Installation Before Installation 5 6 7 Consider the following when deciding where to place the Switch: • The lengths of the cables attached to your keyboard and mouse Unpacking the Product • The location of your computers in relation to your console Before opening the product packaging, inspect the packaging seal condition to assure that product was not accessed or tampered during delivery.
INSTALLATION Table of Contents SECTIONS 1 2 3 Connection and Installation Step 1 Switch 4 5 6 7 Step 2 Connecting Computers to the Belkin Secure Flip KVM Switch Connecting the Console Devices to the Belkin Secure Flip KVM 2.1 Connect the Belkin Secure Flip KVM Switch to the computers via the two attached cables. For the USB cable select any available functional USB port on the computer. For audio connect to the available audio output (lime green color) or line output (blue color) jacks.
OPERATION Table of Contents SECTIONS 1 2 3 Section 4 - Operating the Belkin Secure Flip KVM Switch 5 6 Important: If you are aware of potential security vulnerability while installing or operating this product, we encourage you to contact us immediately at the following email address: gov_security@belkin.com Illuminated Push Buttons The default channel is #1 upon powering up. The user can select any other channel by pressing the appropriate Illuminated panel push button.
TROUBLESHOOTING Table of Contents SECTIONS 1 2 3 Section 5 - Troubleshooting General • • Check that the power supply is properly connected to the mains socket. Check that DC plug is fully inserted into the switch DC jack Check that the device is powered by using optical mouse with visible red light. If power is not available, change the power supply. • • • • • • Channel select LEDs are blinking with audible repeating clicking sounds. • This occurs after the configuration is set.
TROUBLESHOOTING Table of Contents SECTIONS 1 2 3 • • • • Certain keyboard functions are not working • Some non-standard keyboard functions are disabled by the switch to prevent security risks. Contact Belkin Tech Support for latest compatibility list. Video Problem: No video image in user display (both channels) Solutions: • Check that the display is properly powered. Check that DVI cable is properly secured at both sides.
TROUBLESHOOTING Table of Contents SECTIONS 1 2 3 Problem: Bad video image quality (one or both channels) • • • • 5 6 Mouse Solutions: • 4 The computer does not detect my mouse, or my mouse does not work when I switch computers or reboot. Check that all video cables are inserted properly to the Switch, computer, and display. With everything connected, power-cycle the Belkin Secure Flip KVM Switch to reset the video. Make sure the Video Diagnostic LED is solid green.
GENERAL INFORMATION Table of Contents SECTIONS 1 2 3 4 5 6 7 Section 6 - Information FCC Statement DECLARATION OF CONFORMITY ELECTROMAGNETIC COMPATIBILITY WITH FCC RULES Belkin International, Inc., Limited 3-Year Product Warranty FOR We, Belkin International, Inc., of 12045 E. Waterfront Drive, Playa Vista, CA 90094, declare under our sole responsibility that the products: F1DN102V, F1DN102F and F1DN102N to which this declaration relates: What this warranty covers. Belkin International, Inc.
GENERAL INFORMATION Table of Contents SECTIONS 1 2 3 All above warranties are null and void if the Belkin product is not provided to Belkin for inspection upon Belkin’s request at the sole expense of the purchaser, or if Belkin determines that the Belkin product has been improperly installed, altered in any way, or tampered with.
GENERAL INFORMATION Table of Contents SECTIONS 1 2 3 Reporting Belkin Product Security Vulnerability If you are aware of potential security vulnerability with any Belkin Government product, we encourage you to contact us immediately at the following email address: gov_security@belkin.com or our technical support line at: 1-800-419-5546 After your communication is received, Belkin Government personnel will contact you to follow up.
belkin.com © 2013 Belkin International, Inc. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Windows, Windows Vista, Microsoft, and IntelliMouse are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Mac OS and Mac are trademarks of Apple Inc., registered in the U.S. and other countries.
