6-Port Gigabit Switch 24-Port Gigabit Switch Belkin Tech Support US: 877-736-5771 310-898-1100 ext. 2263 Europe: 00 800 223 55 460 Australia: 1800 235 546 New Zealand: 0800 235 546 Singapore: 800 616 1790 Belkin Corporation 501 West Walnut Street Los Angeles, CA 90220-5221, USA 310-898-1100 310-898-1111 fax Belkin Ltd. 7 Bowen Crescent, West Gosford NSW 2250, Australia +61 (0) 2 4372 8600 +61 (0) 2 4372 8603 fax Belkin B.V.
16-Port Gigabit Switch 24-Port Gigabit Switch Share large files at faster network speeds, with maximum efficiency ������� User Manual ����� �� ��������� F5D5141-16 F5D5141-24
Table of Contents 1 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 2 Getting to Know your Switch. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 3 Connecting Networking Devices to your Switch. . . . . . . . . . . . . . . .
Introduction Engineered for compact convenience, each Switch features a durable metal chassis that can be placed on the desktop or integrated into a 19-inch rack, using the included rack-mount kit. All ports auto-negotiate between a 10-, 100-, or 1000Mbps network and adjust for straight-through or crossover cables, so you don’t have to worry about cable type. 1 2 3 4 5 6 7 8 1 section Congratulations on your purchase of this high-quality Belkin 16- or 24-Port Gigabit Switch.
Introduction Features - High-speed, dedicated 10/100/1000 Ethernet ports • 16 ports (Belkin 16-Port Gigabit Switch F5D5141-16) • 24 ports (Belkin 24-Port Gigabit Switch F5D5141-24) - Standards • IEEE 802.3 z/ab 1000Base-T • IEEE 802.3u 100Base-Tx • IEEE 802.
Getting to Know your Switch 1 Front-Panel LEDs (b) 2 3 4 5 ���������������������� (c) (a) (a) Power (POWER) LED • Green – Power on, normal operation • Off – Power off, no power to the Switch (b) Link and Activity (Link/Act) LED • Solid Green – Network device is correctly connected to the Switch through this port • Blinking Green – Data is being transmitted and received through this port • Off – No link is established (c) 100M/1000M LED • Solid Green – A valid 1000Mbps link is established on
Connecting Networking Devices to your Switch Connecting your Switch to your Computers 1. Power down all your equipment. 2. Connect a Category 5e or 6 Ethernet cable between each computer’s network interface card (NIC) and one of the numbered ports on the front of the Switch. 3. All switch ports can automatically negotiate speeds at full- and half-duplex modes to allow users to attach 10Base-T, 100Base-Tx, and 1000Base-T network devices. 4.
Connecting Networking Devices to your Switch Connecting your Switch to another Switch 1 1. Connect a Category 5e or 6 cable between one of the numbered ports on the front of the Switch and one of the numbered ports on the other Switch to which you are cascading or connecting. 2. All switch ports can automatically negotiate speeds at full-and half-duplex modes to allow users to attach 10Base-T, 100Base-Tx, and 1000Base-T network switches or hubs. 3. All ports support auto MDI and MDIX functionality.
Applications This Switch segments your network, significantly increasing both bandwidth and throughput. Each port on the Switch can be attached to any Ethernet, Fast Ethernet, or Gigabit Ethernet device, such as another switch, or a server’s network adapter. All ports operate at 10/100Mbps full and half duplex, or 1000Mbps full duplex, providing up to 2Gbps of bandwidth to the attached device. Bridging Functions This Switch provides fully transparent bridging functions.
Placement of the Switch The Switches can be placed on a flat surface or in a 19-inch rack. 1 2 Placement on a Flat Surface Affix the four included rubber feet on the bottom of the Switch in the area that is clearly marked on each of the four corners. 2. Make sure the Switch is placed in an area that allows for proper ventilation. 3. Place on a flat surface. 3 4 5 Placement in a 19-Inch Rack 1. Do not affix the four rubber feet on the Switch when rack-mounting. If already affixed, remove. 6 2.
Product Specifications Physical Characteristics Standards Conformance IEEE Std 802.
Product Specifications 1 Switching Criteria Network Bridging Function Filtering, forwarding, and learning Switching Method Store-and-forward MAC Address Table F5D5141-16: 8K entries F5D5141-24: 8K entries 3 Packet Buffer F5D5141-16: 320Kb F5D5141-24: 480Kb 4 2 5 7 8 9 section 6
Troubleshooting Diagnosing Switch Indicators Symptom Power LED does not light after power on. Probable Causes AC power cord may be defective. Possible Solutions • Check for loose connections. • Check the power outlet by using it for another device. • Replace the AC power cord. Symptom Port (Link/Act) LED does not light after connection is made. Probable Causes Switch port, network card, or cable may be defective. Possible Solutions • Check that the Switch and attached device are both powered on.
Troubleshooting 1 Power and Cooling Problems If the power indicator does not turn on when the power cord is plugged in, you may have a problem with the power outlet, power cord, or internal power supply as explained in the previous section. However, if the unit powers off after running for a while, check for loose power connections, power losses or surges at the power outlet, and verify that the fan on the right side of the unit (F5D5141-24) is unobstructed and running prior to shutdown.
Information EMI Certification FCC Class A Certification (USA) This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with instructions, may cause harmful interference to radio communications.
Information RFI Emission: • Limit class A according to EN 55022:1998, IEC 60601-1-2 (EMC, medical) • Limit class A for harmonic current emission according to EN 61000-3-2/1995 • Limitation of voltage fluctuation and flicker in low-voltage supply system according to EN 61000-3-3/1995 Immunity: • Product family standard according to EN 55024:1998 1 2 3 4 • Electrostatic Discharge according to EN 61000-4-2:1995 (Contact Discharge: ±4kV, Air Discharge: ±8kV) 5 • Radio-frequency electromagnetic field accordi
Information Safety Compliance Please read the following safety information carefully before installing the Switch: Warning: Do not plug a phone-jack connector into the RJ45 port. This may damage this device. Warning: This product does not contain any user-serviceable parts. Warning: When connecting this device to a power outlet, connect the field ground lead on the tri-pole power plug to a valid earth ground AC-outlet line to prevent electrical hazards and to comply with international safety standards.
Information Belkin Corporation Limited Lifetime Product Warranty What this warranty covers. Belkin Corporation warrants to the original purchaser of this Belkin product that the product shall be free of defects in design, assembly, material, or workmanship. What the period of coverage is. Belkin Corporation warrants the Belkin product for the lifetime of the product. What will we do to correct problems? Product Warranty.
Information Belkin Corporation reserves the right to review the damaged Belkin product. All costs of shipping the Belkin product to Belkin Corporation for inspection shall be borne solely by the purchaser. If Belkin determines, in its sole discretion, that it is impractical to ship the damaged equipment to Belkin Corporation, Belkin may designate, in its sole discretion, an equipment repair facility to inspect and estimate the cost to repair such equipment.
Information 1 2 3 4 5 6 7 17 section 8
