User manual

14 - Belinea 10 60 75
ENGLISH
TROUBLESHOOTING
Blank Screen
Power indicator is off
- Check whether the power cable is connected properly (see section “Connecting”).
- Make sure that the monitor was turned on using the power switch (see section “Startup”).
- Could a power saving mode be active? Press any key on your keyboard, or move the mouse.
Power indicator lights green
- A screen saver may have activated automatically after a certain period of inactivity. Press any key on your keyboard or
move the mouse.
“No Signal”
- Make sure the signal cable is connected to the PC’s VGA connector (see section “Connecting”).
- Is the PC turned on (see section “Startup”)?
Display Problems
Image is displaced to the left/right or to the top/bottom
- If the image is displayed normally but not centered correctly, you can adjust its position using the OSD functions. For
more information on this topic consult the functions “H. Position” and “V. Position” in the “OSD Menu Functions” section.
Image flickers or is shaky
- Perhaps the setup file chosen for the monitor is incorrect. For information on monitor setup under Windows
®
9x/ME/2000,
NT or XP consult the “Configuration” section.
Image is blurred
- Check brightness and contrast settings (see section “Basic Setup”).
- If the vertical frequency is too high, the image might be slightly blurred. In this case lower the frequency.
Color problems
- If the colors are off (e.g. white is not really displayed as white, etc.), you should adjust the color temperature (see “Color
Control” function in section “OSD Menu Functions”).
Image edges distorted
- If the image is slightly distorted, bent or tilted at the edges or the entire image is not aligned horizontally, you can correct
this using the OSD menu functions (see “Trapezoid”, “Parallel”, “Top/Bot Corner” and “Rotation” functions in section
“OSD Menu Functions”).
TECHNICAL SPECIFICATIONS
Picture tube 19 inches diagonal size (45.7 cm visible)
Dot pitch diagonal/horizontal: 0.26 mm/0.22 mm
Glare-free coating, low emissions according to TCO 03, phosphorus type P22
Input signal Video: analog (D-SUB)
Display colors Unlimited colors
Synchronization 30 – 96 kHz horizontal, 50 – 150 Hz vertical
Video bandwith 205 MHz
Resolution Max. resolution 1600 × 1200, ergonomic resolution 1280 × 1024 (85 Hz)
Power supply 100 – 240 VAC, 50/60 Hz
Power consumption ON status: max. 90 W; color of the status LED: green
SLEEP status: < 1 W; color of the status LED: no status indicator
Power saving functions EPA certified
Dimensions / weight Width: 446 mm, height: 461 mm, depth: 457 mm (monitor only); 19 kg (monitor only)
Operating environment Operation: 0 – +40 °C, humidity: 10 – 90 % (without condensation)
Storage: -25 – +60 °C, humidity: 10 – 90 % (without condensation)