User manual

12 - Belinea 10 80 30
ENGLISH
Figure 4. Monitor features
BASIC SETUP
The OSD menu appears in a window on your screen. It
allows you to select the image settings you want to
change.
➧➧
➧➧
➧ How to open the OSD menu ...................................
1. Press the button MENU (
"
in figure 4) to display
the OSD menu on the screen.
2. Select the desired function icon using the buttons
! and " (
#$and$%
in figure 4, see the following
section “OSD Menu Functions”).
3. Press the button SELECT (
&
in figure 4) to activate
the function.
4. Enter the desired value by using the buttons
! and
" (
#$and$%
).
5. To store the setting, press the button MENU again.
Repeat steps 2-4 to make further adjustments as
needed.
6. The OSD menu will automatically disappear if no
changes are made for more than 10 seconds. The
current settings will be saved. You can also close it
manually by pressing the button MENU.
IMAGE SETTINGS USING THE OSD MENU
➧ Monitor setup under Windows
®
9x/ME/2000 and
XP:
If using the monitor under Windows
®
9x/ME/2000 or XP
we strongly recommend installing the Belinea settings file.
You can get this file from your Belinea dealer or download
it from the MAXDATA FTP server at ftp.maxdata.com.
Here, click the “Belinea_Treiber_Driver” directory and
download the Belinea.inf and README_Belinea.TXT
files. Follow the installation instructions in the
README_Belinea.TXT file.
CONFIGURATION
➧➧
➧➧
➧ Monitor setup under Windows
®
NT 4.0:
Under Windows
®
NT 4.0 no separate setup file is
required. Select the vertical frequency and the number
of colors directly from within the “Settings” ' “Control
Panel” ' “Display” ' “Settings” menu.
➧➧
➧➧
➧ Shortcut for adjusting contrast and brightness .....................................................................................................
Belnea
MENU SELECT
MENU SELECT
   

You can adjust the contrast and brightness directly by
pressing the
! or "buttons (
#$ and$%
in fig. 4)
while the OSD menu is not displayed. To adjust the
brightness directly, press the !button. To adjust the
contrast directly, press the
"button. After the corre-
sponding OSD menu is displayed, press the "#button
to increase the brightness or contrast, or press the
!button to reduce it. Press button MENU (
"
in Abb.
4) to close the corresponding menu.