LCD-Monitor Belinea 2025 S1 Handbuch Manual Manuel Manuale Handleiding Handledningen Hånd bok Vejledning Käyttöopas Instrukcja Használati Handbuch Manual Manuel Manuale Handleiding Handledningen Håndbok Vejledning Käyttöopas Instrukcja Használati Handbuch Manual Manuel Manuale Handleiding Handledningen Håndbok Vej ledning Käyttöopas Instrukcja Használati Handbuch Manual Manuel Manuale Handleiding Handled ningen Håndbok Vejledning Käyttöopas Instrukcja Használati Handbuch Manual Manuel Man
BELINEA PREMIUM SERVICE English The three-year return to base warranty for your Belinea monitor includes all parts and labour. In addition many countries offer a free of charge swap out warranty programme. This does not affect your Statutory Rights. Please visit http://www.belinea.com or call the numbers below for further warranty or service information. Please have the serial and model number ready when calling.
ENGLISH INTRODUCTION TABLE OF CONTENTS This manual will familiarize you with the installation and use of your Belinea monitor. Please take the time to look through these instructions even if you are familiar with monitors. INTRODUCTION......................................................... 2 We have taken all possible care to ensure that this manual contains correct, accurate information. However, the manufacturer cannot assume liability for any possible errors.
ENGLISH IMPORTANT INFORMATION Note on monitor placement • The setup location must not be extremely hot, cold, humid or dusty. Heat and cold can impair the functionality of the monitor. Humidity and dust can cause the monitor to fail. • Do not place the monitor near heaters such as radiators or the like. Do not expose the monitor to mechanical vibrations or jarring.
ENGLISH UNPACKING Carefully lift the monitor out of the packaging and make sure that all components are included (see fig. 1). Power cord Save the original box and packing material in case you have to ship or transport the monitor. Audio cable To set up the device, you need to assemble the monitor stand. Join the stand base to the stand post. VGA cable MENU MENU SELECT/AUTO SELECT/AUTO MENU SELECT/AUTO Figure 1. LCD Monitor CONNECTING ➧ To connect the monitor to your PC ........................
ENGLISH CONFIGURATION ➧ Monitor setup under Windows® 9x/ME/2000 and XP: If using the monitor under Windows ® 9x/ME/2000 or XP, we strongly recommend installing the Belinea configuration file. You can obtain this file from your Belinea dealer or download it from the MAXDATA FTP server at ftp. maxdata.com. Here, click the “Belinea_Treiber_Driver” directory and download the Belinea.inf and README_ Belinea.TXT files. Follow the installation instructions in the README_Belinea.TXT file.
ENGLISH OSD MENU FUNCTIONS OTHER LANGUAGE OSD POSITION INFORMATION RESET ENGLISH OFF RUN 1400x1050@60 Hz PRESET MODE Brightness/Contrast Controls the picture’s contrast, brightness. Color Regulates the color temperature settings. Activate the OSD window using the MENU button. Go to the COLOR or buttons. Press the option by pressing the or to select R (red), SELECT/AUTO button and G (green) or B (blue). Then you can change the color or buttons.
ENGLISH TROUBLESHOOTING Blank Screen Power indicator is off - Check if the power cable is connected properly (see section “Connecting”). Make sure that the monitor was turned on using the power switch (see section “Startup”). Power indicator lights orange - Perhaps a power saving mode is active? Press any key on your keyboard or move the mouse. Power indicator lights green - A screen saver may have activated automatically after a certain period of inactivity.
DEFINITION OF THE MAXDATA WARRANTY The MAXDATA warranty covers all failures resulting from defective components and manufacturing defects that occur within the product specific warranty period. The warranty period begins on the date of purchase (date of original customer invoice). Please be aware that in order to maintain your warranty claim the product concerned has to be received by MAXDATA together with the serial number and a copy of the original customer invoice within the warranty period.
• Colour spots resulting from falls • Error class 2 pixel errors (please note the information on ISO 13406-2 on the website of the MAXDATA subsidiary concerned) If the device received by MAXDATA demonstrates two defects and only one of these is covered by the MAXDATA warranty claim, the customer only has the right to repair for the damage to his device covered by the warranty.
Congratulations! You have just purchased a TCO99 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products. This product meets the requirements for the TCO99 scheme which provides for an international environmental and quality labelling of personal computers.
Benelux MAXDATA Benelux B.V. Bredaseweg 113-115, NL -4872 LA Etten-Leur Phone: +31 (0) 76 5039250 France MAXDATA S.A.R.L. 7 avenue du Général de Gaulle, Bâtiment 4, F-91090 Lisses Phone: +33 (0) 169 112990 Germany MAXDATA Computer GmbH & Co. KG Elbestraße 12-16, D-45768 Marl Phone: +49 (0) 2365 952-0 Italy MAXDATA Italia S.r.l. Strada 1, Palazzo F1 I-20090 Milanofiori, Assago (MI) Phone: +39 (0) 2 5777-91 Poland MAXDATA Sp. z.o.o Ursynów Business Park ul.
