[ USER MANUAL LCD-Monitor Belinea 10 15 36 ]
BELINEA PREMIUM SERVICE English The three-year return to base warranty for your Belinea monitor includes all parts and labour. In addition many countries offer a free of charge swap out warranty programme. This does not affect your Statutory Rights. Please visit http://www.belinea.com or call the numbers below for further warranty or service information. Please have the serial and model number ready when calling.
ENGLISH INTRODUCTION TABLE OF CONTENTS This manual will familiarize you with the installation and use of your Belinea Monitor. Please take the time to look through these instructions even if you are familiar with monitors. INTRODUCTION ......................................................... 2 We have taken all possible care to ensure that this manual contains correct, accurate information. However, the manufacturer cannot assume liability for any possible errors.
ENGLISH IMPORTANT INFORMATION Note on monitor placement • The setup location must not be extremely hot, cold, humid or dusty. Heat and cold can impair the functionality of the monitor. Humidity and dust can cause the monitor to fail. • Don’t place the monitor near heaters such as radiators or the like. Don’t expose the monitor to mechanical vibrations or jarring.
ENGLISH UNPACKING Power cord Carefully lift the monitor out of the packaging and make sure that all components are included (see fig. 1). Save the original box and packing material in case you have to ship or transport the monitor. Audio cable To set up the device, you must fit the monitor base together. VGA cable Figure 1. LCD Monitor CONNECTING ➧ To connect the monitor to your PC ......................... 1. Make sure that the PC and monitor are unplugged. 2.
ENGLISH CONFIGURATION ➧ Monitor setup under Windows ® 9x/ME/2000 and XP: If using the monitor under Windows ® 9x/ME/2000 or XP, we strongly recommend installing the Belinea configuration file. You can obtain this file from your Belinea dealer or download it from the MAXDATA FTP server at ftp.maxdata.com. ➧ Monitor setup under Windows ® NT 4.0: Under Windows ® NT 4.0 no separate setup file is required.
ENGLISH OSD MENU FUNCTIONS Main Menu Auto Adjust Contrast/Brightness Color Adjust Information Image Adjust Setup Menu Memory Recall Audio Menu Exit Auto Adjust Automatically selects the optimal values for the image settings (image position, phase, etc.). Contrast/Brightness Adjusts screen contrast and brightness. Use the button ( in fig. 4) to switch between the two functions.
ENGLISH TROUBLESHOOTING Blank Screen Power indicator is off - Make sure the power cable and the power adapter are connected properly (see section “Connecting”). Make sure that the monitor was turned on using the power switch (see section “Startup”). Power indicator lights orange - Perhaps a power saving mode is active? Power indicator lights green - A screen saver may have activated automatically after a certain period of inactivity. Press any key on your keyboard or move the mouse.
ENGLISH DEFINITION OF THE MAXDATA WARRANTY The MAXDATA warranty covers all failures resulting from defective components and manufacturing defects that occur within the product specific warranty period. The warranty period begins on the date of purchase (date of original customer invoice). Please be aware that in order to maintain your warranty claim the product concerned has to be received by MAXDATA together with the serial number and a copy of the original customer invoice within the warranty period.
ENGLISH • Colour spots resulting from falls • Error class 2 pixel errors (please note the information on ISO 13406-2 on the website of the MAXDATA subsidiary concerned). If the device received by MAXDATA demonstrates two defects and only one of these is covered by the MAXDATA warranty claim, the customer only has the right to repair for the damage to his device covered by the warranty.
Congratulations! You have just purchased a TCO99 approved and labelled product! Your choice has provided you with a product developed for professional use. Your purchase has also contributed to reducing the burden on the environment and also to the further development of environmentally adapted electronics products. This product meets the requirements for the TCO99 scheme which provides for an international environmental and quality labelling of personal computers.
Austria MAXDATA Computer GmbH Ignaz-Köck-Straße 9 • A-1210 Wien � Benelux MAXDATA Benelux B.V. Bredaseweg 113-115 • NL-4872 LA Etten-Leur Germany MAXDATA Computer GmbH & Co. KG Elbestraße 12-16 • D-45768 Marl France MAXDATA S.A.R.L. 1, rue du Gevaudan • SILIC 1726 F-91017 EVRY-LISSES Italy MAXDATA Italia S.r.l. Strada 1, Palazzo F1 I-20090 Milanofiori, Assago (MI) Poland MAXDATA Sp. z o.o. Ursynów Business Park Ul.
