Brochure
Table Of Contents
- DamperTech_2010 381
- DamperTech_2010 382
- DamperTech_2010 383
- DamperTech_2010 384
- DamperTech_2010 385
- DamperTech_2010 386
- DamperTech_2010 387
- DamperTech_2010 388
- DamperTech_2010 389
- DamperTech_2010 390
- DamperTech_2010 391
- DamperTech_2010 392
- DamperTech_2010 393
- DamperTech_2010 394
- DamperTech_2010 396
- DamperTech_2010 397
- DamperTech_2010 398
- DamperTech_2010 399
- DamperTech_2010 400
- DamperTech_2010 401
- DamperTech_2010 402
- DamperTech_2010 403
- DamperTech_2010 404
- DamperTech_2010 405
- DamperTech_2010 406
- DamperTech_2010 407
- DamperTech_2010 408
- DamperTech_2010 409
- DamperTech_2010 410
- DamperTech_2010 411
- DamperTech_2010 412
- DamperTech_2010 413
- DamperTech_2010 414
- DamperTech_2010 415
800-543-9038 USA 866-805-7089 CANADA 203-791-8396 LATIN AMERICA / CARIBBEAN
P10414 - 05/13 - Subject to change. © Belimo Aircontrols (USA), Inc.
ZG-102 Multiple Actuator Mounting Bracket
For GK, AF and GM Series Actuators
Application
The ZG-102 multiple actuator mounting bracket is designed for cases where it is
necessary to mount two actuators to one shaft to provide extra torque.
The dual mounting bracket is typically used with the GK, AF and GM series
actuators. This is due to the fact that each of these series are the highest torque
range available.
Figures A and B demonstrates two different mounting configurations using the
ZG-102 mounting bracket.
FIGURE A
The major advantage with this method is it requires less mounting area. The
manual override, if available, cannot be used in this configuration.
FIGURE B
The major advantages are that a shorter shaft is required and a lower profile is
achieved.
OTHER CRANK ARM ADAPTOR KITS AND
UNIVERSAL MOUNTING BRACKETS
KIT MOUNTING BRACKET* SUITABLE ACTUATOR
ZG-EFB ZG-100, ZG-101 EF
ZG-AFB ZG-100, ZG-101 AF, NF
ZG-AFB118 ZG-118 (included) AF, NF
ZG-LF112 ZG-112 (Included) LF
ZG-LF2 N/A LF
ZG-LFC114 N/A LF
ZG-ECON1 ZG-112 (Included) LF
ZG-ECON2 ZG-112 (Included) LF
ZG-TF112 ZG-113 (Included) TF
ZG-TF2 N/A TF
ZG-GMA ZG-100, ZG-101, ZG-103, ZG-104 GK, GM
ZG-NMA ZG-100, ZG-101, ZG-103, ZG-104 NM, AM
*Unless otherwise noted, mounting brackets are not included in crank arm adaptor kits.
Dimensions (Inches [mm])
Hole set B
Hole set A
7"
[77.8]
3-3/8"
[85.7]
5 3/4"
[146.1]
1-15/16"
[49]
Material 12 GA Galvanized
Weight 1.8 lbs.