Mechanical Accessories M40024 - 05/10 - Subject to change. © Belimo Aircontrols (USA), Inc. We’ll help solve any application problem with a wide range of accessories and unparalleled customer service. The Belimo Difference ● Customer Commitment. Extensive product range. Competitive project pricing. Application assistance. Same-day shipments. Free technical support. Five year warranty. ● Low Installation and Life-Cycle Cost. Easy installation. Accuracy and repeatability. Low power consumption.
Linkage Accessories M40024 - 05/10 - Subject to change. © Belimo Aircontrols (USA), Inc. Clamp / Positioner Indicators Mechanical Accessories Part Number Description IND-AFB Damper Position Indicator AFB AF IND-AF2 Damper Position Indicator IND-LF Damper Position Indicator IND-TF Damper Position Indicator K7-2 Standard AFB/NFB Clamp (1/2" to 1.05") K4-2 US Standard AF/NF Clamp (1/2" to 1.05") ● K4-1 US Jackshaft Clamp (Up to 1.
Part Number ZG-100 Description Universal Mounting Bracket AFB AF NFB ● ● ZG-101 Universal Mounting Bracket ● ● ZG-102 Multiple Actuator Mounting Bracket ● ● TF GM AM ● ● ● ● ● ● NM LM AH LH LU ● ZG-103 Universal Mounting Bracket ● ● ● ZG-104 Universal Mounting Bracket ● ● ● ZG-106 Universal Mounting Bracket ● ZG-107 Universal Mounting Bracket ● ZG-108 Universal Mounting Bracket ● ZG-109 Mounting Bracket for ZS-260 Housings ● ● ● ● ● ● ZG-110 Mounting
Part Number Description AF-CC US Conduit Connector AFB TF-CC US Conduit Connector ● AF-P Anti-Rotation Bracket (11414) ● LF-P Anti-Rotation Bracket (11695) TF-P Anti-Rotation Bracket (11533) Z-DS1 Rotary Support for Lateral Force Compensation Tool-06 8 mm and 10 mm Wrench Tool-07 13 mm Wrench AF NFB LF TF GM AM NM LM AH LH LU ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● M40024 - 05/10 - Subject to change. © Belimo Aircontrols (USA), Inc.
AFB, AFX / NFB, NFX Accessories Clamps / Position Indicators / Rotation Limiters K7-2 US Standard Clamp. Fits shafts 1/2" to 1.05". IND-AFB Damper Position Indicator. For damper position indication in short shaft installations Shaft Adaptors / Extensions AV8-25 Shaft Extension. For damper operating shafts. Approx. 6-5/8" [170 mm] extension for shafts 1/4" to 3/4" [6 to 20 mm]. The shaft adaptors listed below may be used with AFB, AFX, NFB, NFX actuators. For more information see page 410.
AF/NF Accessories Clamps / Position Indicators / Rotation Limiters K4 US Clamp. Fits shafts 3/8" to 3/4". K4-1 US Jackshaft Clamp. Fits jackshafts up to 1.05". K4-2 US Standard Clamp. Fits shafts 1/2" to 1.05". K4-H Hex Shaft clamp. Fits hex shafts 3/8” to 5/8”. IND-AF2 Damper Position Indicator. For damper position indication in short shaft installations. ZDB-AF2 US US Angle of Rotation Limiter for AF/NF actuators. Includes IND-AF2. KH-AFV V-Bolt Kit allows for direct coupling with KH-LF.
LF Accessories K6 US Clamp. Fits shafts 3/8" to 1/2". K6-1 Clamp. Fits shafts 1/2" to 3/4". IND-LF Damper Position Indicator ZDB-LF Angle of Rotation Limiter for LF actuators KH-LFV V-Bolt Kit allows direct coupling with KH-LF. Contains V-Bolt and 2 nuts. Shaft Adaptors / Extensions ZG-LMSA-1 Shaft Adaptor (See LM Accessories) AV6-20 Shaft Extension. For damper operating shafts. Approx. 6 ⁵⁄₈" [170 mm] extension for shafts ¼" to ¾" [6 to 20 mm] (must use K6-1 clamp). AV8-25 Shaft Extension.
TF Accessories Clamps / Position Indicators / Rotation Limiters IND-TF Damper Position Indicator ZDB-TF Angle of Rotation Limiter for TF actuators. Shaft Adaptors / Extensions AV6-20 Shaft Extension. For damper operating shafts. Approx. 6-5/8" [170 mm] extension for shafts 1/4" to 3/4" [6 to 20 mm]. Non-Direct Mounting ZG-TF112 Crank Arm Adaptor Kit. For more information see page 406. ZG-TF2 Crank Arm Adaptor Kit. For more information see page 407. KH-TF US Crank Arm.
Clamps / Position Indicators / Rotation Limiters K-GM20 Reversible Clamp. Fits shafts up to 1.05". Shaft Adaptors AV8-25 Shaft Extension. For damper operating shafts. Approx. 9.8" [170 mm] extension for shafts 5/16" to 1" [8 to 10 mm]. The shaft adaptors listed below may be used with GM actuators. For more information see page 410. ZG-JSA-1 ZG-JSA-2 ZG-JSA-3 Non-Direct Mounting ZG-GMA Crank Arm Adaptor Kit For more information see page 403. AH-GMA Crank Arm 23681-00001 GK Adaptor.
AM/AMQ Accessories Clamps / Position Indicators / Rotation Limiters K-AM25 Standard Reversible Clamp. Fits shafts up to 1.05". K-SA Reversible Clamp. Fits shafts up to 3/4". Non-Direct Mounting ZG-NMA Crank Arm Adaptor Kit For more information see page 404. AH-25 Crank Arm Shaft Adaptors / Extensions AV8-25 Shaft Extension. For damper operating shafts. Approx. 9.8" [170 mm] extension for shafts 5/16" to 1" [8 to 10 mm]. The shaft adaptors listed below may be used with AM actuators.
NM/NMQ Accessories Clamps / Position Indicators / Rotation Limiters K-AM25 Standard Reversible Clamp. Fits shafts up to 1.05". K-NA Reversible Clamp. Fits shafts up to 3/4". Non-Direct Mounting ZG-NMA Crank Arm Adaptor Kit For more information see page 404. AH-25 Crank Arm Shaft Adaptors / Extensions ZG-NMSA-1 Short Shaft Extension AV8-25 Shaft Extension. For damper operating shafts. Approx. 9.8" [170 mm] extension for shafts 5/16" to 1" [8 to 10 mm].
LM/LMQ Accessories Clamps / Position Indicators / Rotation Limiters K-LM20 Clamp. Fits shafts up to 3/4". K-LM16 Standard Clamp. Fits shafts up to 5/8". K-LM12 Clamp. Fits shafts up to 1/2". K-LM10 Clamp. Fits shafts up to 3/8". Shaft Adaptors / Extensions ZG-LMSA Shaft Extension ZG-LMSA-1 Shaft Extension AV6-20 Shaft Extension. For damper operating shafts. Approx. 6 ⁵⁄₈" [170 mm] extension for shafts ¼" to ¾" [6 to 20 mm] (must use K6-1 clamp).
AH/AHQ/AHK, LH/LHQ and LU Accessories AH/LH Accessories Crank arms / Ball Joints / Push Rods KH6 Universal Crank Arm (For more information see Universal Accessories). KH8 Universal Crank Arm (For more information see Universal Accessories). KG6 Ball Joint (Zinc Plated) (For more information see Universal Accessories). KG8 Ball Joint (Galvanized) (For more information see Universal Accessories). KG10 Ball Joint (Zinc Plated) (For more information see Universal Accessories).
Universal Accessories Universal Crank arms KH6 Zinc plated steel. Slot width 1/4” (6.2mm). For damper shafts: 3/8” to 11/16” dia. (10 to 18mm) or 3/8” to 9/16” sq. (10 to 14mm). Uses KG6 Ball Joint. KH8 Zinc plated steel. Slot width 21/64” (8.2mm). For damper shafts: 3/8” to 11/16” dia. (10 to 18mm) or 3/8” to 9/16” sq. (10 to 14mm). Uses KG8 or KG10A Ball Joint. KH10 Zinc plated steel. Slot width 21/64” (8.2mm). For damper shafts: 9/16” to 1.05" dia. (14 to 25mm). Uses KG10A Ball Joint.
ZG-102 Multiple Actuator Mounting Bracket For GK, AF and GM Series Actuators Application The ZG-102 multiple actuator mounting bracket is designed for cases where it is necessary to mount two actuators to one shaft to provide extra torque. The dual mounting bracket is typically used with the GK, AF and GM series actuators. This is due to the fact that each of these series are the highest torque range available.
ZG-AFB118 Crank Arm Adaptor Kit For AFB, AFX, NFB and NFX Series Actuators Application The ZG-AFB118 Crank Arm Adaptor Kit is designed for applications where the actuator cannot be mounted directly to the damper shaft. It may be used for outside or inside the duct mounting.
ZG-AFB118 Crank Arm Adaptor Kit Mounting Positions for Typical Replacements Barber Colman™ MA Type - Vertical Barber Colman™ MA Type - Horizontal (left) Barber Colman™ MA Type - Horizontal (right) Honeywell™ Mod. IV Type - Vertical Honeywell™ Mod. IV Type - Horizontal (left) Honeywell™ Mod. IV Type - Horizontal (right) Johnson Controls™ 100 Series Type and Honeywell™ Mod. III Type - Vertical Johnson Controls™ 100 Series Type and Honeywell™ Mod.
ZG-AF108 Crank Arm Adaptor Kit For AF Series Actuators Application The ZG-AF108 Crank Arm Adaptor Kit is designed for applications where the actuator cannot be mounted directly to the damper shaft. It may be used for outside or inside the duct mounting.
ZG-AF108 Crank Arm Adaptor Kit Mounting Positions for Typical Replacements Barber Colman™ MA Type - Vertical Barber Colman™ MA Type - Horizontal (left) Barber Colman™ MA Type - Horizontal (right) Honeywell™ Mod. IV Type- Vertical Honeywell™ Mod. IV Type - Horizontal (left) Honeywell™ Mod. IV Type - Horizontal (right) Johnson Control™ 100 Series Type and Honeywell™ Mod. III Type Vertical Johnson Control™ 100 Series Type and Honeywell™ Mod.
ZG-106 and ZG-107 Universal Mounting Brackets For AF Series Actuators Application The ZG-106 and ZG-107 Universal Mounting Brackets are designed for applications where the actuator cannot be mounted directly to the damper shaft. They may be used for outside or inside the duct mounting. The ZG-106 and ZG-107 is provided with hole patterns to mount the AF series actuators in either a horizontal or vertical position to meet space requirements.
ZG-AFB Crank Arm Adaptor Kit For AFB, AFX, NFB and NFX Series Actuators A li i Application ZG AFB ZG-AFB The ZG-AFB Crank Arm Adaptor Kit is designed for applications where the actuator cannot be mounted directly to the damper shaft.
ZG-AF US Crank Arm Adaptor Kit For AF Series Actuators Application i i ZG AF US ZG-AF The ZG-AF US Crank Arm Adaptor Kit is designed for applications where the actuator cannot be mounted directly to the damper shaft.
ZG-GMA Crank Arm Adaptor Kit For GM Series Actuators A li i Application The ZG-GMA Crank Arm Adaptor Kit is designed for applications where the actuator cannot be mounted directly to the damper shaft.
ZG-NMA Crank Arm Adaptor Kit For AM and NM Series Actuators Application i i The ZG-NMA Crank arm Adaptor Kit is designed for applications where the actuator cannot be mounted directly to the damper shaft.
ZG-100, ZG-101, ZG-103, ZG-104 Universal Mounting Brackets For AM, SM, GM, NFB(X), and AFB(X) Series Actuators ZG-100 Universal Mounting Bracket* (Inches [mm]) ZG-101 Universal Mounting Bracket* (Inches [mm]) Material 12 GA Galvanized Weight 5.6 lbs. (2.5 kg) Material 12 GA Galvanized Weight 77.77 lbs. lbs (3 (3.55 kg) ZG-104 Universal Mounting Bracket (Inches [mm]) M40024 - 05/10 - Subject to change. © Belimo Aircontrols (USA), Inc.
ZG-LF112 and ZG-TF112 Crank Arm Adaptor Kits For LF and TF Series Actuators ZG-LF112 Crank Arm Adaptor Kit For LF Series Actuators Application The ZG-LF112 Crank Arm Adaptor Kit is designed for applications where the actuator cannot be mounted directly to the damper shaft. It may be used for outside or inside the duct mounting.
ZG-LF2 and ZG-TF2 Crank Arm Adaptor Kits For LF and TF Series Actuators ZG-LF2 Crank Arm Adaptor Kit For LF Series Actuators Application The ZG-LF2 Crank Arm Adaptor Kit is designed for applications where the actuator cannot be mounted directly to the damper shaft. It may be used for outside or inside the duct mounting.
ZG-LFC114 Crank Arm Adaptor Kits For LF Series Actuators Application i i The ZG-LFC114 Crank Arm Adaptor Kit is designed for Trane voyager economizer actuator retrofit. ZG-LFC114 The ZG-LFC114 Crank Arm Adaptor Kit includes: 1 Mounting Bracket 1 Shaft Adaptor 2 Bolts with Nuts 4 Female Spade Connectors Note: May require crank arm and ball joints USE WHEN REPLACING THESE ACTUATORS M40024 - 05/10 - Subject to change. © Belimo Aircontrols (USA), Inc.
ZG-ECON1 and ECON2 Crank Arm Adaptor Kits For LF and Series Actuators ZG-ECON1 Crank Arm Adaptor Kit For LF Series Actuators Application The ZG-ECON1 Crank Arm Adaptor Kit is designed for applications where the actuator cannot be mounted directly to the damper shaft. It may be used for outside or inside the duct mounting.
Jack Shaft Adaptors ZG-JSA-... To Adapt Hollow Jack Shafts to Fit Belimo Actuators Application i i The ZG-JSA jack shaft adaptors are designed to be inserted into hollow jack shafts which have an outside diameter greater than 3/4 inch and provide a 3/4 inch shaft for mounting Belimo actuators. Technical Data Jack Shaft Size Weight Material ZG-JSA-1 Dimensions (Inches [mm]) Outside diameter 1.00” Inside diameter 3/4” 1.3 lbs.
Weather Shields ZS-150 Weather Shield Application Application The ZS-100 weather shield provides moderate protection to actuators which are mounted outdoors. This product is not designed as a water tight enclosure. The weather shield will work with all damper actuators. The ZS-150 weather shield provides moderate protection to actuators which are mounted outdoors. This product is not designed as a water tight enclosure.
ZS-260 Explosion-proof Housing For GM…, AM…, AFB..., AFX…, NFB…, NFX..., LF… Actuators Application The ZS-260 explosion-proof housing may be used with the GM…, AM…, NFB…, NFX..., AFB…, AFX…, AF..., LF… series actuators. This housing is not designed for direct coupling. UL and CSA; Class I, Division 1&2, Groups B, C, D, (NEMA 7), Class II, Division 1&2, Groups E, F and G, (NEMA 9), Class III, Hazardous (classified) Locations, outdoor application NEMA 4X.
ZS-260 Explosion-proof Housing For GM…, AM…, AFB..., AFX…, NFB…, NFX..., LF… Actuators ZS-260 Shaft Thru Front Rear Shaft Location Plug 5 ZS-260 Mounting Instructions Front 10 4 Bolt Housing 1. Determine proper operating shaft location. Drive Shaft Back 2 2. Remove threaded plug from the hole in which the operating shaft will be mounted. 3. Install the anti-rotation strap, mounting plate, to the side of the housing where the operating shaft will be mounted. 8 4.
ZS-300 Protective Housing NEMA 4X, stainless steel, corrosion resistant enclosures for AMB, GMB, LF, NFB, NFX, AFB, AFX and AF actuators ZS-300 S NEMA 4X Housing i For AMB, GMB, LF, NFB, NFX, AFB, AFX, AF Series Actuators Application The ZS-300 (-1) NEMA 4X enclosures may be used with AMB, GMB, LF, NF, and AF Belimo actuators.
ZS-300 (-1, -5) NEMA 4X, stainless steel, corrosion resistant enclosures for AM, GM, NFB, NFX, AFB, AFX and AF actuators ZS-300 Mounting Instructions 1. The damper operating shaft should extend approximately 1-1/2 inches from the damper assembly or duct side. Mount the drive shaft/coupler to the damper operating shaft . Fasten the coupler to the damper operating shaft by tightening the two 3/8 inch square head set screws . ➀ ➁ ➂ 2. Determine the housing mounting orientation for the application. 3.
