Accessory List

ManualsBrandsBelimo ManualsCharacterized Control Valves3/4" B2 Series, 2-Way Characterized Control Valve (Nickel Plated Forged Brass Body) - Cv Rating (7.4)

Table Of Contents

800-543-9038 USA 866-805-7089 CANADA 203-791-8396 LATIN AMERICA

Application

The CCV-EXT-KIT can be used with most CCV’s* in order to achieve a

large clearance over the pipe. The Extension Kit will provide an

additional 2” of space between the top of the valve and the base of the

actuator. The bracket is made from aluminum and is not intended as a

thermal block.

– Extension kit will be automatically assembled with any

Flanged CCV assembly.

D165

1.65"

Accessories

CCV-EXT-KIT, CCV Valve Neck Extension Kit

Technical Data

Extension Height 2"

Total Weight 0.7 lb

Material

Extension Housing Aluminum - Anodized

Shaft Stainless Steel

Threaded Hardware Stainless Steel

Bearing Oilite

Bearing

Retaining Clip Stainless Steel

LRB (X) ARB (X) LF AF

Extension Bracket

CCV-EXT-Kit

● ● ● ●

* Cannot be used with N4 actuators.

* Available for previous NF assemblies.

* CCV-EXT-KIT cannot be used with any valve smaller than the

B212(B) and B312(B).

Available in Spring

and Non-Spring

Summary of content (4 pages)

PAGE 1
Accessories CCV-EXT-KIT, CCV Valve Neck Extension Kit Application The CCV-EXT-KIT can be used with most CCV’s* in order to achieve a large clearance over the pipe. The Extension Kit will provide an additional 2” of space between the top of the valve and the base of the actuator. The bracket is made from aluminum and is not intended as a thermal block. D165 – Extension kit will be automatically assembled with any Flanged CCV assembly.
PAGE 2
Accessories ZS-CCV... New Characterized Control Valve Weather Shield Application The ZS-CCV... weather shield provides moderate protection for valves which are mounted outdoors. This product is designed as a water tight enclosure. The housing allows easy mounting over the actuator, while allowing easy viewing of the actuator in operation. Weather shield for PICCV/CCV to provide protection for actuators in outdoor applications.
PAGE 3
Accessories Auxiliary Switches S1A, S2A For the non-spring return direct-coupled actuators Application The S1A and S2A auxiliary switches are used to indicate when a desired position of a valve is reached or to interface additional controls for a specific control sequence. Operation The S1A and S2A auxiliary switches are mounted onto the direct coupled actuator.
PAGE 4
Accessories Feedback Potentiometer P...A For the non-spring return direct-coupled actuators Application The P…A feedback potentiometers are used with LR and AR actuators to provide a resistive signal which varies with valve position. The P…A units are applied with commercial proportional temperature controllers to provide feedback of the valve position, or with electric or electronic meters to provide position indication.