User Guide

800-543-9038 USA 866-805-7089 CANADA 203-791-8396 LATIN AMERICA
6
Pre-Set MFT Confi gurations
DC Voltage Control
Application
How the MFT actuator performs is determined by the configuration (P-10001,
A01). The old generation actuators used a P-code (P-10001). The new
generation actuators use a shorter 3 digit code. This shorter code is displayed
on the reorder number.
P-1000... configuration types are used for control voltage applications.
Additional pre-set configurations are listed which offer solutions for non-
standard control application for:
• Adjustable Start and Stop points
• Sequencing actuators
• Combination for master slave (see page 19.)
Wiring Diagram
(1) Common
(2) + Hot
(3) Y Input
(5) U Output
Position Feedback
Control Signal
Line
Volts
24 VAC/DC Transformer
CCW CW
(+)
(–)
(+)
(–)
…MFT
W040
VDC
Select Configuration
Configuration Code Input Range Position Feedback Running Time Torque % Adaptation
Voltage
P-10001* A01 2.0 to 10.0 VDC 2.0 to 10.0 VDC 150 100 MANUAL
P-10002 A02 0.5 to 10.0 VDC 0.5 to 10.0 VDC 150 100 MANUAL
P-10003 A03 2.0 to 10.0 VDC 0.5 to 5.0 VDC 150 100 MANUAL
P-10004 A04 4.0 to 7.0 VDC 2.0 to 10.0 VDC 150 100 MANUAL
P-10005 A05 6.0 to 9.0 VDC 2.0 to 10.0 VDC 150 100 MANUAL
P-10006 A06 10.5 to 13.5 VDC 2.0 to 10.0 VDC 150 100 MANUAL
P-10007 A07 0.5 to 5.0 VDC 2.0 to 10.0 VDC 150 100 MANUAL
P-10008 A08 0.5 to 5.0 VDC 0.5 to 10.0 VDC 150 100 MANUAL
P-10009 A09 5.0 to 10.0 VDC 2.0 to 10.0 VDC 150 100 MANUAL
P-10010 A10 5.0 to 10.0 VDC 0.5 to 10.0 VDC 150 100 MANUAL
P-10013 A13 0.5 to 10.0 VDC 2.0 to 10.0 VDC 150 100 MANUAL
P-10015 A15 2.0 to 5.0 VDC 2.0 to 10.0 VDC 150 100 MANUAL
P-10016 A16 2.0 to 6.0 VDC 2.0 to 10.0 VDC 150 100 MANUAL
P-10017 A17 6.0 to 10.0 VDC 2.0 to 10.0 VDC 150 100 MANUAL
P-10018 A18 14.0 to 17.0 VDC 2.0 to 10.0 VDC 150 100 MANUAL
P-10020 A20 9.0 to 12.0 VDC 2.0 to 10.0 VDC 150 100 MANUAL
P-10031 A31 0.5 to 4.0 VDC 2.0 to 10.0 VDC 150 100 MANUAL
P-10063 A63 0.5 to 4.5 VDC 0.5 to 4.5 VDC 150 100 MANUAL
P-10064 A64 5.5 to 10.0 VDC 5.5 to 10.0 VDC 150 100 MANUAL
P-10091 A91 2.0 to 10.0 VDC 2.0 to 10.0 VDC 95 100** MANUAL
* P-10001 (A01) is the default configuration code.
** Reduced torque in Spring Return (see page 19)
Spring Return Actuators
AFX24-MFT(-S) 180 in-lb
AF24-MFT(-S) US 133 in-lb
NFX24-MFT(-S) 90 in-lb
NF24-MFT US 60 in-lb
LF24-MFT(-S) US 35 in-lb
LF24-MFT(-S)-20 US 35 in-lb
TF24-MFT US 18 in-lb
Non-Spring Return Actuators
GMX24-MFT 360 in-lb
AMX24-MFT 180 in-lb
NMX24-MFT 90 in-lb
LMX24-MFT 45 in-lb
AMQX24-MFT 140 in-lb
NMQX24-MFT 70 in-lb
LMQX24-MFT 35 in-lb
AHX24-MFT 101 lbf
AHQX24-MFT-100 44 lbf
LHX24-MFT 34 lbf
LHQX24-MFT-100 22 lbf
LUX24-MFT 27 in-lb
M40035 - 05/10 - Subject to change. © Belimo Aircontrols (USA), Inc.