User guide

Restoring Factory Settings 53
Configuring the Forum IPhone 545 SIP Telephone
Reset to factory settings after operation on another com-
munications system
It is possible that you have been operating the Forum IPhone 545
SIP telephone with another communications system or with an
Internet SIP provider. To operate the telephone with the
Forum 500 / Forum 5000 communications system, you should
restore factory settings.
1. Establish an Ethernet connection to the SIP telephone
Forum IPhone 545 by connecting it to the Forum 500 /
Forum 5000 communications system. The telephone requires a
DHCP address to execute the restart.
2. Wait until the telephone has started. Now press the options
key .
The
Options list menu card appears.
3. Press the
Advanced softkey.
The display shows
Enter Administrator Password .
4. Enter the administrator password with the number keys
(please refer to Forum IPhone 545 SIP Telephone Passwords
on page 54). Confirm using the
Enter softkey.
The
Advanced menu card appears.
5. Press the
Reset softkey.
The
Reset menu card appears.
6. Press the
Factory Default softkey.
The telephone restarts and obtains its configuration from the
Forum 500 / Forum 5000 communications system.