User guide

Main menu42
SIP Telephone Menus Forum IPhone 545
Note: If the other telephone is already in the call state (e. g.
an answering machine is making an announcement), you can
pick up the call with “Pick-up select.”. The subscriber for whom
you picked up the call must belong to a user group for which
“Call removal” authorisation is activated, otherwise “Pick-up
select” is not possible.
3 Take : You wish to take a current call from one terminal over
to your telephone and continue the call on the
telephone. To be able to do so, your telephone and the
other terminal have to have the same internal call
number.
2 Dial
1 Announcement : You direct an announcement to other
system terminals. Under
Dest: you enter the call
number and press the
Enter softkey.
Announcements can be configured on the following
terminals: corded Forum Phone [phone],
Forum Phone 520/530 type system telephones and
DECT Forum Free 566/576/586, Forum Free 565/575/
585 type system telephones.
Announcements can also be directed to call numbers
where multiple subscribers can be reached (e.g. a hunt
group call number).
Note: If a called subscriber has announcement
protection on, this feature is not executed.
2 Intercom : This function is for directing an announcement to
a single system terminal and the microphone is
switched on on the system terminal called. The
subscriber called can answer you immediately without
having to press a key. Enter the device ID of the
terminal under
Device-ID: and press the Enter
softkey. For information on the device IDs available,
contact your system administrator.
The
Intercom function is for contacting the following
terminals: corded Forum Phone [phone],
Forum Phone 520/530 type system telephones and
DECT Forum Free 566/576/586, Forum Free 565/575/
585 type system telephones.