User guide

Main menu 41
SIP Telephone Menus Forum IPhone 545
4 Baby call : The “Baby call” function dials a previously
programmed internal or external call number a specific time
interval after picking up the handset. The default time interval
on the communications system is 5 seconds. The system
administrator can change this value. If you begin dialling a call
number within the specified time interval, the baby call is
cancelled. The menu entry displays the current status: “+” =
on, “-” = off.
Dest. : Enter the destination call number for a baby call.
On / Off : switching baby call on or off
8 Call wait. prot. (call waiting protection): Switches baby call
on/off (please refer to the chapter Call Waiting Protection
starting on page 31). The menu entry displays the current
status: “+” = on, “-” = off.
On / Off : switching call-waiting protection on or off
0 Logout : If the system administrator for the system telephone
has configured the “Hot Desking” function and you are logged
in to this system telephone as a user, you can use this menu
entry to log out. Please refer to the chapter Hot Desking
starting on page 33 for further information on this function.
6 Connections
The following features are executed if the current connection state
of your telephone permits.
1 Call pick-up
1 Pick-up : You pick up the call intended for another telephone
in your pick-up group (see also the chapter Accepting a
Call for Another Terminal (Pickup from Group) starting
on page 18).
If the called subscriber belongs to a user group with
pick-up protection activated, you cannot pick up calls
for that person's call number.
2 Pick-up select. (pick-up selective): After entering the call
number, you pick up the call for any other telephone.
If the called subscriber belongs to a user group with
pick-up protection activated, you cannot pick up calls
for that person's call number.