User guide

Call Forwarding 27
Operating Forum IPhone 545 SIP Telephone
current status (“+” = on, “-” = off). A separate call forwarding
can be configured for each type of call forwarding.
2. Press the softkey on the display line showing the desired
call forwarding type .
3. Program the following call forwarding parameters by pressing
the respective softkey next to it.
–
Dest. : Enter the call number to be forwarded to.
–
Duration : When programming call forwarding after time,
enter the time in seconds after which a call is to be forwarded
(10 sec … 120 sec). If you do not enter a value, the default
time interval provided by the system administrator at system
configuration is used (default: 20 seconds).
–
Internal calls / External calls / int./ext. calls :
Select which calls are to be forwarded.
–
On / Off : Switching call forwarding on or off. Active call
forwarding is indicated by a “+” sign. This is followed by the
call forwarding destination.
4. Press the goodbye key to exit the menu card.
Tip: Call forwarding can also be set using the main menu:
2 Call
forwarding
> 1 Call diversion (see page 39). The Follow Me
type call forwarding can also be set there.
Notes
z All calls for the call numbers of your device are forwarded. If a
number is in use on more than one telephone, then calls made
to any of the other telephones will be forwarded as well.
z You can activate all types of call forwarding simultaneously. In
this case, the
Immediately type call forwarding is always
executed.