User guide

Call Forwarding26

Operating Forum IPhone 545 SIP Telephone

Add Bluetooth device

1. (Optional) Activate the

Device Name

field by pressing on it.

Then enter the device name via the softkey keyboard.

2. Press the

Add new device

softkey. Press the

softkey to search for a Bluetooth headset.

Once the search is completed the Bluetooth devices located

appear on the display.

Pairing (mutual logging on)

1. Press the desired Bluetooth headset on the display.

2. You will be requested to enter the PIN which is “0000” in the

default setting. If this PIN is not accepted, look up the correct

PIN in the Bluetooth headset documentation.

Once pairing has been successfully completed, the display

shows a softkey with a green outline which has the device

name of the Bluetooth headset on it. If the softkey has a red

outline, this means that pairing was unsuccessful.

3. Press the goodbye key to exit the menu card.

Logging out Bluetooth Headset

1. Press on the softkey next to the softkey of the Bluetooth

headset.

The Bluetooth headset is logged out from the

Forum IPhone 545 SIP telephone.

2. Press the goodbye key to exit the menu card.

Call Forwarding

The administrator of the Forum 500 / Forum 5000 communica-

tions system can configure a Call forward function key (please

refer to Programming Function Keys starting on page 49).

1. Press the Call forward function key.

The display shows a separate line with

Immediately

After

delay

Busy

for each type of call forwarding along with the