User guide
2 Call Forwarding 31
Main Menu on the Forum IPhone 512 SIP Telephone
Note: If you are the last reachable member of the hunt group
and you log out then any further callers will hear a busy signal.
Depending on the system configuration additional calls can
also be directed to the exchange.
2 Call Forwarding
1 Call diversion
: Programming call diversions for your own
telephone. The display shows a separate line with
Immediately
,
After delay
or
Busy
for each type of call
forwarding along with the current status (“+” = on, “-” = off).
6 Follow Me
: This type of call forwarding diverts calls from
another terminal (source) to your telephone. The PIN of the
source terminal is required for this function. If the “follow me”
function is active, all call numbers of the other device are
forwarded immediatelyto your telephone.
Source
: Enter the internal call number from which calls are to
be forwarded and press the
Enter
softkey.
PIN
: Enter the user PIN of the source and press the
Enter
softkey.
On
/
Off
: Switching call forwarding on or off. You can switch
“Follow me” call forwarding off again on your own
telephone or on the other terminal via the
Off
option.
You can also switch off “Divert call immediately” on the
other terminal. The menu entry displays the current
status: “+” = on, “-” = off.
3 Messages
1 Short messages
: You can exchange short messages with other
communications system users with a system terminal.
1 Received mail
: A list of senders of received messages is
displayed. You can display, forward or delete these
messages.