User guide

Configuring the Forum 523/52482
Configuration
tings. Entry can be made from an analogue telephone, an ISDN
telephone and from system telephones.
Set IP Address
H *182 Z (system PIN) *
Z (www) * Z (xxx) * Z (yyy) * Z (zzz) #
Set NET Mask
H *183 Z (system PIN) *
Z (www) * Z (xxx) * Z (yyy) * Z (zzz) #
Example
Enter:
H*182
0000*192*168*99*254#
If required, initiate a system restart with the following procedure:
Trigger Restart
H * 1 8 5 Z (system PIN) #
Use the PIN you entered in the dialogue box for initial access.
The factory setting is “0000”.
Receiving System Messages as E-Mail
Important events and errors are kept by the Forum 523/524 in an
internal log book: the error store. To inform or alert the system
administrators, entries in the log book (system messages) can be
sent via e-mail.
In order not to notified of every error, the administrator can
define corresponding log filters (in the Configurator, the Diag-
nosis: Log Filter menu). These filters define which errors (cate-
gory, severity, number per time interval) should be notified. The
e-mails always include an internal event or error number, as well
as an explanation of the message. Further, extra parameters
(such as the port number when a trunk line drops out) are also
provided.
The mail account for this service (Account for LOG filter) is con-
figured in the Configurator, Network: E-Mail menu.