User guide

SNMP Interface218
Application Interfaces
Configuring SNMP
The SNMP Agent requires the IP address of the SNMP Manager for
operation. System messages in the form of SNMP Traps are sent
to this IP address. You manage the IP address of the SNMP Man-
ager in the Forum 523/524 communications system configurator.
1. Start the web console of the Forum 523/524 communications
system.
2. Navigate to the Telephony page in the
Configurator:Settings. Click on the Change button.
Telephony: Settings: SNMP
3. Enter the IP address of the SNMP Manager into the SNMP
Manager input field.
4. Confirm with Apply.
The IP address of the SNMP Manager is made available to the
SNMP Agent in a configuration file via the TFTP server of the
Forum 523/524 communications system.