User guide

Telephony Basic Settings18
Factory Settings on Delivery
Factory Settings on
Delivery
The following basic settings and features are active on delivery.
We recommend that you configure the Forum 523/524 communi-
cations system to suit your individual requirements before using it
(see Configuration starting on page 72).
Note: The basic settings apply to the smallest version of
Forum 523/524, i.e., without additional interface cards.
Telephony Basic Settings
z The S
0
1 port is configured for multi-terminal access, the S
0
2
port for system access.
z The 3 U
pn
-ports are configured for Forum Phone 525 system
telephones with the call numbers 30 to 32.
z The 4 a/b ports are configured for analogue devices with the
call numbers 10 to 13.
z The Forum 523/524 is configured ready for use in Belgium.
z All corded terminals ring if there are incoming external calls.
z The password for the “Administrator” user is empty.
z The system PIN, for remote programmable call diversion for
example, is set at “0000”.