User guide

Configuration 151
DECT over IP
®
– PBX IP address: IP address of the Forum 523/524
– PBX port: Leave the default setting on “8099”.
5. Under TFTP server address enter the IP address the
operating software is to be downloaded from. This will usually
be the communications system’s IP address. Leave the TFTP
file name setting on the default setting (“/ram/ip_tel/
ip_rfp.cnt”).
6. For a remote location, the Forum 523/524’s LAN will usually be
accessed via a (VPN) router. Click on Router addresses: [+].
Enter the router’s IP address (“default gateway”). Confirm by
clicking on Add.
7. Click on Send config to activate the desired IP address
configuration.