Specifications

3. Type “IPCONFIG /RENEW” and press the ENTER key. Verify that your IP Address is now

192.168.1.xxx, your Subnet Mask is 255.255.255.0 and your Default Gateway is 192.168.1.1.

These values confirm that your Belgacom b-box is functioning.

Type “EXIT” and press the ENTER key to close the Command Prompt window.

Your computer is now configured to connect to the Belgacom b-box.

Manual IP Configuration

1. Follow steps 1-5 in “DHCP IP Configuration” on page 3-9.

2. Select “Use the following IP Address.”

3. Enter an IP address based on the default network 192.168.1.x (where x is between 2 and

254), use 255.255.255.0 for the subnet mask. and the IP address of the Belgacom b-box

(default: 192.168.1.1) for the Default gateway field.

4. Select “Use the following DNS server addresses.”

5. Enter the IP address for the Belgacom b-box in the Preferred DNS server field. This

automatically relays DNS requests to the DNS server(s) provided by your ISP. Otherwise,

add a specific DNS server into the Alternate DNS Server field and click OK to close the

dialog boxes.

6. Record the configured information in the following table.