Specifications

Obtain IP Settings From Your Belgacom b-box

Now that you have configured your computer to connect to your Belgacom b-box, it needs

to obtain new network settings. By releasing old DHCP IP settings and renewing them with

settings from your Belgacom b-box, you can verify that you have configured your computer

correctly.

1. On the Windows desktop, click Start/Programs/ Accessories/Command Prompt.

2. In the Command Prompt window, type “IPCONFIG /RELEASE” and press the ENTER

key.

1. Type “IPCONFIG /RENEW” and press the ENTER key. Verify that your IP Address is

now 192.168.1.xxx, your Subnet Mask is 255.255.255.0 and your Default Gateway is

192.168.1.254. These values confirm that your Belgacom b-box is functioning.

2. Type “EXIT” and press the ENTER key to close the Command Prompt window.