Datasheet

Belden 1633E
Product Datasheet
P/N - 43132 Rev.3A
Page 2 of 2
Date 01-05-2001
CAT 5 enhanced FTP PVC
Belden Wire & Cable B.V.
All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner.
All printing errors are subject to correction. Technical apecifications are subject to change without notice.
Nominal mutual capacitance at 1 kHz 50 nF/km
Maximum conductor DCR 93,5 Ohm/km
NVP - Nominal Velocity of Propagation 0.70 c
SKEW – Propagation delay difference (100 MHz)
typical ≤ 15 ns/100m
Impedance 1 - 100 MHz 100 ± 15 Ohm
Temperature range - operation -20°C - +60°C
Temperature range - installation +0°C - +50°C
Minimum bending radius - operation 24 mm
Minimum bending radius - installation 48 mm
Maximum pulling tension 80 N
Flame retardancy IEC 332-1
Energy of flame 515 kJ/m
Weight (approx.) 43 kg/km
Maximum operating voltage 48 V rms
Maximum continuous current per conductor (25°C)
1.4 A
MARKING
Text on the cable jacket Inkjet printing
Meter marking: Yes
JACKET COLOUR
Colour RAL code Belden colour code
Grey RAL 7032 3251
PACKAGING (PUT UP)
Belden code Delivery length Weight Remark
43132 xxxx 240 500 m 21.0 kg Non returnable reel
43132 xxxx 241 1000 m 42.0 kg Non returnable reel
xxxx: Belden colour code
Electrical characteristics
(
at 20 ºC
)
Orderin
g
information
General and environmental characteristics
BELDEN 1633E FTP CAT5E 4PR AWG24 ISO/IEC 11801 EN 50173 VERIFIED 100 OHM