Datasheet

Belden 1583ENH
Product Datasheet
P/N 46376 - Rev. 3B
Page 2 of 2
Date 29-04-2009
Cat 5 enhanced UTP FRNC
 Belden Wire & Cable B.V.
All rights are reserved. Reproduction in whole or in part is prohibited without the written consent of the copyright owner
Nominal mutual capacitance at 1 kHz 50 nF/km
Maximum conductor DCR 93.5 Ohm/km
NVP - Nominal Velocity of Propagation 0.68 c
SKEW – Propagation delay difference (100 MHz)
Typical ≤ 10 ns/100m
Impedance 1-100 MHz 100 ± 15 Ohm
Temperature range - operation -20°C - +60°C
Temperature range - installation +0°C - +50°C
Minimum bending radius - operation 19 mm
Minimum bending radius - installation 38 mm
Maximum pulling tension 80 N
Flame retardancy IEC 332-1
Energy of flame 250 kJ/m
Weight (approx.) 28 kg/km
Maximum operating voltage 48 V rms
Maximum continuous current per conductor (25°C)
1.4 A
MARKING
Text on the cable jacket Inkjet printing
Meter marking: Yes
Production date marking: Yes
JACKET COLOUR
Colour RAL code
Grey RAL 7032
Blue RAL 5015
Red RAL 3000
Green RAL 6018
Yellow RAL 1018
Orange RAL 2003
Electrical charact
eristics (at 20 ºC)
Ordering information
General and environmental characteristics
BELDEN 1583ENH UTP CAT5E 4PR AWG24 LSNH ISO/IEC 11801 EN50173
VERIFIED 100 OHM