Instruction manual

FMCS-1 Monitor
Page 16 FMCS-1
16-8. OUTPUT SETTINGS POPUP MENU
The FMCS-1provides 8 channels of analog audio output, 8 channels of AES/EBU output, and a headphone output. Any one of these output jacks maybe
assigned any of the available audio: Mute, L, L(*), R, R(*), L+R, L+R(*), L−R, L−R(*), SCA#1, SCA#2 ,Pilot, Test 0dB, Test −3dB, and Test −6dB. The
(*) is the de-emphasized audio, otherwise the audio is flat. The SCA#1 and SCA#2 audio de-emphasis is selected in the SCA pop up window. The Test
waveforms are a 1 kHz sine wave at 0, −3, and −6dBFS.
Analog CH#1−CH#8: Routes the specified audio source to the selected Analog Channel.
AES/EBU CH#1−CH#8: Routes the specified digital audio source to the selected AES/EBU Channel.
Headphone L and R: Assigns the audio program to the headphone Left and Right channels.
Headphone Volume: Sets the Headphone volume, range is 1 to 100% in 1% steps.
16-9. NETWORK STATUS POPUP MENU
MAC: MAC address of the FMCS-1.
Host: The Hostname of the FMCS-1.
IP Address: IP Address assigned to the unit.
Subnet: Subnet address.
Gateway: Gateway address.
DHCP: Status of DHCP.
Refresh: To refresh the network status information click on the Refresh button.