Datasheet

Bel Stewart Connector
Instruction Sheet MN390011
Page 5 of 8 Rev A1
FOR Cable with an OVERALL FOIL SHIELD
(FTP – Foil Screened Twisted Pair)
T568B Wiring Pattern
Cut cable to length. If you are using a strain relief grommet, slide it over the cable. The larger ends should be
facing outward, toward the plug end of the cable.
1
1 to 1
1
/
4
INCHES
2
Cut and strip off 1 to 1
1
/
4
inches of the outer jacket. Be careful not to cut or nick the drain wire and foil shield.
DRAIN WIRE
3
Fold the foil shield and drain wire back over the cable jacket.
FOIL