Instructions / Assembly

WALL LANTERN
Assembly Instructions
TOOLS
REQUIRED
Ladder
Safety
glasses
Electrical
tape
Phillips
screwdriver
Flat blade
screwdriver
Pliers
Wire
strippers
Mounting Screws
*PARTS SHOWN MAY DIFFER SLIGHTLY PER LIGHT FIXTURE
page 1
CAUTION
Inspect the wire insulation for any cuts,
abrasions, or exposed copper that may have
resulted during shipping. If there is a defect in
the wire, do not attempt installation.
Before starting installation of this fixture or
removal of a previous fixture, disconnect the
power by turning o ff the circuit breaker or by
removing the fuse at the fuse box.
Fixture
Wire Nuts
Mounting Unit

Summary of content (2 pages)