Specifications

2 DRYPOINT RA 80 – 720
Dear Customer,
thank you for choosing our product. In order to get the best performances out of this product, please read this manual
carefully.
To avoid incorrect operation of the equipment and possible physical risk to the operator, please read and strictly follow
the instructions contained in this manual.
Note, these instructions are in addition to the safety rules that apply in the country where the dryer is installed. Before
packing for shipment each DRYPOINT RA series refrigerated air dryer undergoes a rigorous test to ensure the absence
of any manufacturing faults and to demonstrate that the device can perform all the functions for which it has been
designed.
Once the dryer has been properly installed according to the instructions in this manual, it will be ready for use without
any further adjustment. The operation is fully automatic, and the maintenance is limited to few controls and some
cleaning operations, as detailed in the following chapters.
This manual must be maintained available in any moment for future references and it has to be intended as inherent
part of the relevant dryer.
Due to the continuous technical evolution, we reserve the right to introduce any necessary change without giving
previous notice.
Should you experience any trouble, or for further information, please do not hesitate to contact us.
DATA NAMEPLATE
Model

Product key

Serial n°.

Nominal Flow Rate

Working pressure PS min/max

Inlet temperature TS max

Ambient Temp.

Refrigerant

Refrig. Design Pres. HP/LP

Power supply

Electric Nominal Power

Fuse Max.

The data nameplate is located on
the back of the dryer and shows all
the primary data of the machine.
Upon installation, fill in the table on
the previous page with all the data
shown on the data nameplate. This
data should always be referred to
when calling the manufacturer or
distributor.
The removal or alteration of the
data nameplate will void the
warranty rights.
Produktschlüssel:
Product key:
Serial n° / year of building:
Serienr. / Baujahr:
Nominal flow rate (ISO1217):
m /h
3
Working pressure PS min/max:
Nemmvolumenstrom (ISO1217):
Betriebsüberdruck PS min/max:
bar(g)
Inlet temperature TS max:
Eintrittstemperatur TS max:
°C
Ambient Temperature:
Umgebungstemperatur:
°C
Refrigerant:
Kältemittel:
kg
Refrig. Design Pres. HP/LP:
Kältem. Auslegungsdruck HD/ND:
bar
Power supply:
Elektrischer Anschluß:
ph/V/Hz
Electric Nominal Power:
Elektrische Leistung:
W/A
Fuse protection max:
Absicherung max:
A
DRYPOINT
BEKO TECHNOLOGIES GMBH
Im Taubental 7, 41468 Neuss
Germany
http:// www.beko.de
T
A
D
0
0
0
3