Dryer User Manual 2960311039_EN/220115.
Please read this user manual first! Dear Customer, Thank you for prefering a Beko product. We hope that your product which has been manufactured with high quality and technology will give you the best results. We advise you to read through this manual and the other accompanying documentation carefully before using your product and keep it for future reference. If you transfer the product to someone else, give its manual as well.
1 Important instructions for safety and environment This section contains safety instructions that will help protect from risk of personal injury or property damage. Failure to follow these instructions shall void any warranty. 1.
Important instructions for safety and environment 1.1.1 Electrical safety Electrical safety instructions should be followed while electrical connection is made during the installation. A • Connect the dryer to a grounded outlet protected by a fuse at the value specified on the type label. Have the grounding installation performed by a qualified electrician. Our company shall not be liable for any damages that will arise when the dryer is used without grounding in accordance with the local regulations.
Important instructions for safety and environment 1.1.2 Product safety Points to be taken into consideration for fire hazard: Below specified laundry or items must not be dried in the dryer considering fire hazard. • Unwashed laundry items • Items soiled with oil, acetone, alcohol, fuel oil, kerosene, stain removers, turpentine, paraffin or paraffin removers must be washed in hot water with plenty of detergent before being dried in the dryer.
Important instructions for safety and environment • You must provide enough ventilation in order to prevent gases exiting from devices operating with other types of fuels including the naked flame from accumulating in the room due to the back fire effect. Underwear that contains metal reinforcements should not be dried in the dryer. Dryer may be damaged if metal reinforcements come loose and break off during drying.
Important instructions for safety and environment 1.2 Mounting over a washing machine • A fixing device should be used between the two machines when installing the dryer above a washing machine. The fitting device must be installed by the authorized service agent. • Total weight of the washing machine and the dryer -with full load- when they are placed on top of each other reaches to approx. 180 kilograms.
Important instructions for safety and environment 1.3 Intended use • Dryer has been designed for domestic use. It is not suitable for commercial use and it must not be used out of its intended use. • Use the dryer only for drying laundry that are marked accordingly. • The manufacturer waives any responsibility arisen from incorrect usage or transportation. • The service life of the dryer that you purchased is 10 years.
Important instructions for safety and environment 1.5 Compliance with the WEEE regulation and disposing of the waste product This product complies with EU WEEE Directive (2012/19/EU). This product bears a classification symbol for waste electrical and electronic equipment (WEEE). This product has been manufactured with high quality parts and materials which can be reused and are suitable for recycling. Do not dispose of the waste product with normal domestic and other wastes at the end of its service life.
Important instructions for safety and environment 1.8 Technical Specifications EN Height (Min. / Max.) Width Depth Capacity (max.) Net weight (plastic front door usage) Net weight (glass front door usage) Voltage Rated power input Model code 84,6 cm / 86,6 cm* 59,5 cm 54 cm 7 kg** 36 kg 38 kg See type label*** * Min. height: Height with adjustable feet are closed. Max. height: Height with adjustable feet are opened maximum. ** Dry laundry weight before washing.
2 Your Dryer 2.1 Package Contents 1 2 3 4 5 1. Water drain hose * 2. Filter drawer spare sponge* 3. User Manual 4. Drying basket* 5. Drying basket user manual* *It can be supplied with your machine depending on its model.
3 Installation Before the calling the nearest Authorized Service for the installation of the dryer, ensure that electrical installation and water drain is appropriate referring to the user's manual.(See 3.3 Connecting to the drain and 3.5 Electrical connection) If they are not suitable, contact a qualified electrician and technician to make necessary arrangements. C A Preparation of the dryer's location as well as the electrical and waste water installations is under customer's responsibility. 3.
Installation 1 2 3.5 Electrical connection For specific instructions for electrical connection required during installation (see 1.1.1 Electrical Safety) 3.6 Transportation of the dryer 3 A C C 4 Unplug the dryer before transporting it. Drain all water that has remained in the dryer. If direct water drain connection is made, then remove the hose connections. We recommend carrying the dryer in upright position.
4 Preparation 4.1 Laundry suitable for drying in the dryer Always obey the instructions given on the garment tags. Dry only the laundry having a label stating that they are suitable for drying in a dryer and make sure that you select the appropriate programme.
Preparation • • Clean the condenser regularly at least once every month or after every 30 drying cycles. (See 6.4 in Maintenance and cleaning) Ventilate the room, where the dryer is located, well during drying. 4.5 Correct load capacity Follow the instructions in the “Programme selection and consumption table”. Do not load more than the capacity values stated in the table. C It is not recommended to load the dryer with laundry exceeding the level indicated in the figure.
5 Operating the product 5.1 Control panel 1 3 4 1. 2. 3. 4. 2 On/Off/Program selection button Start/Pause button Delay time button Audio alarm level button 5.
Operating the product 5.3 Preparation of Tumble Dryer • • • • • Plug in the tumble dryer. Open the loading door. Place the laundry into the tumble dryer without overloading. Push and close the loading door. A When you select the desired program by using On/off/program selection button, the machine will turn on. 1 Take care not to trap any laundry inside the loading door. 4 C 3 2 Selection of program by using On/off/ program selection button doesn’t mean that the program has been started.
Operating the product 5.5 Program selection and consumption table Programs Program Description Capacity (kg) Spin Speed in Washing Drying Time (min) Machine (rpm) Cotton Cupboard dry You may dry all your cotton laundry in this program. (T-shirt, pants, pyjamas, baby clothes, underwear, linen, etc.) You can put your laundry in the wardrobe without ironing. 7 1000 116 Cotton Cupboard dry + You may use this program for extra dryness in thick laundry such as pants, tracksuit.
Operating the product * : Energy Label standard program (EN 61121:2012) All the filters must be cleaned prior to test series. All values in the table have been specified as per the EN 61121:2012 standard. Consumption values may vary from the values in the table depending on the variances in laundry type, spin speed, ambient conditions, and voltage values.
Operating the product 5.6 Auxiliary functions Audio alarm An audio alarm is heard when the program is completed in the tumble drier. If you do not want to hear the audio alarm, please press the “Audio Alarm” button. When you press the audio alarm button, the light turns on and you hear no alarm at the completion of program. C You may select this function before or after the program starts. C Warning indicators may vary depending on the model of your tumble drier. 5.
Operating the product C When the program selection switch is turned while the tumble drier is running and child lock is active, two beeps are heard. If the child lock is cancelled without restoring the program selection to switch to its previous position, program is ended because the position of program selection switch is changed. 5.9 Changing the program after starting After the tumble drier starts running, you may dry your laundry in a different program by changing the selected program.
6 Maintenance and cleaning Service life of product extends and frequently experienced problems will be reduced if it is cleaned at regular intervals. 6.1 Cleaning Lint Filter / Loading Door Inner Surface Lint and fiber released from the laundry to the air during the drying cycle are collected in the Lint Filter. C A C Such fiber and lint are generally formed during wearing and washing. • Clean the entire inner surface of the loading door and loading door gasket with a soft damp cloth.
Maintenance and cleaning A Never use solvents, cleaning agents or similar substances for cleaning due to the risk of fire and explosion! • Drain the water in the tank. • If there is lint accumulation in the funnel of the water tank, clean it under running water. Place the water tank into its seat. • 6.3 Draining the water tank Dampness of the laundry is removed and condensed during drying process and the water that arise accumulates in the water tank. Drain the water tank after each drying cycle.
Maintenance and cleaning 2. Unlock the 2 condenser locks after opening the kick plate. 6. Close the kick plate cover. 3. Pull out the condenser. 4. Clean the condenser by applying pressurized water with a shower armature and wait until the water drains. 5. Place the condenser in its housing. Fasten the 2 locks and make sure that they are seated securely.
7 Troubleshooting Drying process lasts for a long time. • Pores of the fibre filter might be clogged. >>> Wash the filter with warm water. • Condenser might be clogged. >>> Wash the condenser. • Ventilation grills at the front of machine might be blocked. >>> Remove any items in front of the ventilation grills that block ventilation. • Ventilation might be inadequate if the installation area is very small. >>> Open the windows and doors in order to prevent excessive increase in room temperature.
Troubleshooting Water is leaking from the condenser cover. • There might be fibre build-up inside the loading door and on the surfaces of loading door gasket. >>> Clean the inner surfaces of loading door and surfaces of loading door gasket. Loading door opens itself. • Loading door might not be properly closed. >>> Push the loading door until you hear the closing sound. Water tank warning led is on/flashes. • Water tank might be full. >>> Drain the water tank. • Water drain hose might be folded.
8 Electrical Connection Make sure that you have an earthed power outlet socket rated at 13 amps (minimum). Attention! If you use your dryer as built-in, the socket must be reachable after installation, or a separate switch (which can disconnect the two poles) must be used in the installation. Check for suitability. For a permanent connection, a master switch with at least 3mm contact clearance and minumum 13 A rating must be used.
