Washing Machine D2 7081 E D2 7082 E D2 7101 E D2 7102 E D2 7102 ES
Please read this manual first! Dear Customer, We hope that your product which has been manufactured in modern facilities and passed through a strict quality control procedure will give you the best results. Therefore, we advise you to read through this manual carefully before using your product and keep it for future reference. This operation manual will… …help you use your machine in a fast and safe way. • Please read the Operation Manual before installing and starting your machine.
TABLE OF CONTENTS 1 Your Washing Machine 4 Overview . . . . . . . . . . . . . . . . . . . . . . 4 Specifications . . . . . . . . . . . . . . . . . . . 5 2 Warnings 6 General Safety . . . . . . . . . . . . . . . . . . 6 First Use . . . . . . . . . . . . . . . . . . . . . . . 6 Intended use . . . . . . . . . . . . . . . . . . . 6 Safety instructions . . . . . . . . . . . . . . . 7 If there are children in your house... . . 7 3 Installation 8 Removing packaging reinforcement . .
1 Your Washing Machine Overview Figure 1 � � � � � � 1 - Detergent Drawer 4 - Control Panel 2 - Door 5 - Filter Cap 3 - Top Lid 6 - Height-adjustable feet 4 TR
D2 7081 E D2 7082 E D2 7101 E D2 7102 E D2 7102 ES Specifications Maximum dry laundry capacity (kg) 7 7 7 7 7 Height (cm) 84 84 84 84 84 Width (cm) 60 60 60 60 60 Depth (cm) 54 54 54 54 54 Net Weight (kg) 72 72 72 72 72 Models Electricity (V/Hz.) Total Current (A) 220-240 V / 50hz 10 10 Total Power (W) Spinning cycle (rpm max.
2 Warnings for 3 seconds to cancel the program set in your machine before calling the authorized service. Please read the following information. Otherwise, there may be the risk of personal injury or material damage. Moreover, any warranty and reliability commitment will become void. First Use • General Safety • • • • • • • Never place your machine on a carpet covered floor. Otherwise, lack of airflow from below of your machine may cause electrical parts to overheat.
If there are children in your house... companies that produce detergents for your machine. • Safety instructions • • • • • • • • • • This appliance must be connected to an earthed outlet protected by a fuse of suitable capacity. The supply and draining hoses must always be securely fastened and remain in an undamaged state. Fit the draining hose to a washbasin or bathtub securely before starting up your machine.
3 Installation C Keep the transportation safety bolts in a safe place to reuse when the washing machine needs to be Removing packaging reinforcement Tilt the machine to remove the packaging reinforcement. Remove the packaging reinforcement by pulling the ribbon. moved again in the future.
of any leakage. Retighten the nut carefully after checking the seal. To prevent any water leakage and any other damage to be caused by it, keep the taps closed when the machine is not in use. Connecting to the water supply. Important: • The water supply pressure required to run the machine must be 1-10 bar (0,1 – 1,0 MPa). Attach a pressure-reducing valve if the water pressure is higher. • Connect the special hoses supplied with the machine to the water intake valves on the machine.
national regulations. Power cord plug must be within easy reach after installation. • The voltage and the allowed fuse protection are specified in the section “Technical Specifications”. • The specified voltage must be equal to your mains voltage. • Connection via extension cords or multi-plugs should not be made. B A damaged power cable must be replaced by a qualified electrician.
4 Initial preparations for washing • Sorting the laundry • Sort the laundry according to type of fabric, color, and degree of soiling and permissible water temperature. Always follow the advice on the garment labels. • • Non machine Do not wash Washing water Wash with washable temperature sensitive, short programs.
Detergent, softener and other cleaning agents Add detergent and softener before starting the washing program. Never open the detergent dispenser drawer while the washing program is running! When using a program without prewash, no detergent should be put into the pre-wash compartment (Compartment no. I). A program without pre-wash should not be selected if a detergent bag or a dispensing ball is going to be used.
for prewashing for main washing with hard water for washing machines and always follow the instructions on the package. Detergent quantity 1/2 measure 1 measure an additional 1/2 measure Softener Put the softener into the softener compartment of the detergent dispenser. • Use the proportions recommended on the packet. • Never exceed the (> max <) level marking; otherwise, the softener will be wasted without being used.
5 Selecting a program and operating your machine Control panel Figure 2 7 8 13 14 9 11a 11b 11c 11d 10 12 7 - Spin Speed Adjustment Button 8 - Time Delaying Button (+/-) 9 - Temperature Adjustment Button 10 - Start/Pause/Cancel Button 11 - Auxiliary Function Buttons 12 - Program Selection Knob 13 - Display 14 - On / Off Button 14 TR
Display symbols Figure 3 13.a - Spin Speed Indicator 13.b – Temperature Indicator 13.c – Spinning Symbol 13.d – Temperature Symbol 13.e – Remaining Time and Delaying Time Indicator 13.f – Program Indicator Symbols (prewash/mainwash/rinsing/softener/ spinning) 13.g – Economy Symbol 13.h – Time Delaying Symbol 13.i – Door Locked Symbol 13.j – Start Symbol 13.k – Pause Symbol 13.l – Auxiliary Function Symbols 13.
not be put in the prewash compartment. Less detergent should be put in the main wash compartment as the veil foams too much because of its meshed structure. Woollens You can wash your machine-washable woollen garments at this program. Wash by selecting the proper temperature according to the labels of your clothes. It is recommended to use appropriate detergents for woolens. which you cannot use the “Cotton 60°C” program. Intensive You can wash your durable and heavily soiled clothes at this program.
Cold selection is shown with “-” symbol. When the “Temperature” button is pressed after coming to the Cold selection, the maximum temperature of the program you have selected will be displayed. To decrease the temperature, press the “Temperature” button again. 90˚C Normally soiled, white cottons and linens. (Ex.: coffee table covers, tablecloths, towels, bed sheets) 60˚C Normally soiled, fade proof colored linens, cottons or synthetic clothes (Ex.
Program selection and consumption table Programme Duration (~min) Water Consumption (l) Energy Consumption (kWh) 90 7 153 52 2.72 max. • • • • • • • • • • • • • Cottons 60** 7 144 52 1.33 max. • • • • • • • • • • • • • Cottons 40 7 124 52 0.72 max. • • • • • • • • • • • • • Super 40 7 159 52 0.84 max. • • Intensive 60 7 189 70 1.43 max. * • • • • • Babycare 90 7 139 70 2.40 max. * Synthetics 60 3 132 59 1.
Auxiliary functions Auxiliary function selection keys 11a • • • • 11b 11c 11d Depending on the program, you can select the desired auxiliary function by pressing the buttons. Select the required auxiliary functions before starting the program. Some combinations cannot be selected together. (Ex.: Prewash and Quick Wash. Symbol of the selected auxiliary function (Figure 3-2l) will light up.
Time delay With the “Time delay” function you can delay the program start up to 24 hours. Setting can be made in intervals of 30 minutes. 1. Open the loading door, place the laundry inside and fill with detergent. 2. Set the washing program, temperature, spin speed and, if required, select the auxiliary functions. 3. Press “Time delaying” buttons “+” and “-” (Figure 2-6) to set your desired time delay. Time delaying symbol (Figure 3-2h) will flash. 4. Press “Start/Pause/Cancel” button (Figure 2-8).
Main wash Main wash symbol will light up to indicate that the main wash cycle has started. Rinse Rinse symbol lights up at the beginning of the rinse step. Softener Softener symbol lights up at the beginning of softener step. Spin Spin symbol will light up at the beginning of the final spin, during “Spin” and “Pump” special programs.
on the screen whenever any button is pressed while the machine is childlocked. To deactivate the child-proof lock, press the 2nd and 4th auxiliary function buttons for 3 sec. “C:OFF” (Child lock is deactivated) label appears on the screen. without spinning: Press “Start/Pause/Cancel” button (Figure 2-8). Standby symbol (Figure 3-2k) will fade. Start symbol (Figure 3-2j) will light up. The program continues and only pumps out the water.
6 Quick instructions for daily use Preparation 1. Turn the tap on completely. Check if the hoses are connected tightly. 2. Place the laundry in the machine. 3. Add detergent and softener. Starting 1. Press the “On/Off” button. 2. Select the program and the temperature. 3. If desired (according to your machine’s model): – select any auxiliary function, – adjust the spin speed, – set the time delay, 4. Close the loading door. 5. Press “Start/Pause/Cancel” button.
After the program is finished Program indicator symbols on the screen will remain lit after the program is finished. “End” will appear on the screen. 1. Open the loading door and take out the laundry when the door locked symbol on the display fades out. 2. Press the “On/Off” button. 3. Turn the water tap off. 4. Remove any folds in the rubber seal on the loading door and check for debris. 5. Leave the loading door and detergent drawer open to dry.
7 Cleaning and care Detergent drawer Remove any powder residue buildup in the drawer. To do this; 1. Press the dotted point on the siphon in the softener compartment and pull towards you until the compartment is removed from the machine. C If more than a normal amount of water and softener mixture starts to gather in the softener compartment, the siphon must be cleaned. 2. Wash the dispenser drawer and the siphon with plenty of lukewarm water in a washbasin.
• • • If the filters are very dirty, you can pull them out by means of pliers and clean them. Take out the filters on the flat ends of the water intake hoses together with the gaskets and clean thoroughly under streaming water. Replace the gaskets and filters carefully and tighten the hose nuts by hand.
• • • • from the filter. Loosen pump filter (anticlockwise) until water starts to flow out of it. Direct the flowing water into the container you have placed in front of the filter. You can use a piece of cloth to absorb any spilled water. When there is no water left, turn the pump filter until it is completely loose and remove it. Clean any residues inside the filter as well as fibers, if any, around the propeller region.
8 Troubleshooting Problem Program cannot be started or selected. Water in the machine. There is water coming from the bottom of the machine. Machine does not fill with water. Machine does not discharge water. Machine vibrates or shakes. Machine stopped shortly after the program started. Cause Explanation / Suggestion Machine may have switched to self protection mode due to an infrastructure problem (such as line voltage, water pressure, etc.).
The water being taken in is directly discharged. No water can be seen in the machine during washing. Improper position of the drain hose. Connect the water draining hose as described in the operation manual. This is not a problem. The water level is not visible from the outside of the machine. The door is jammed. Water level might be above the lower level of Run either the “Pump” or “Spin” program. the door. Machine might be heating up the water or it may be Wait until the process is over.
In the case of a paused countdown while taking in water: Timer will not countdown until the machine is filled with the correct amount of water. In the case of a paused countdown at the heating It continuously step: Time will not count washes. down until the selected Remaining for the time does not temperature program is reached count down. In the case of a paused countdown at the spinning step: There may be an imbalance of laundry in the machine. It continuously spins.
- Using insufficient amount of detergent for a long time, - Washing at low Washing temperatures for a long performance is time, poor: - Using insufficient Laundry turns amount of detergent for gray hard waters (soil can stick to the laundry), - Using excessive amount of detergent (detergent can stick to the laundry). Insufficient amount of detergent used. Washing Excessive laundry loaded performance is into machine poor: Stain could not Wrong program and be removed, temperature might have not cleaned.
The amount, brand and storage conditions of the detergent used might not be appropriate. Store detergent in a closed and dry place. Do not keep them under high temperatures. Detergent might have been put in the wrong compartment. If detergent is put in the prewash compartment although prewash cycle is not selected, the machine can take this detergent during rinsing or softener step. Machine filter may be Check the filter. clogged. Drain hose may be folded. Check the drain hose.
Detergent may have been Dry the detergent drawer before putting in put in wet dispenser detergent. drawer. Detergent may have gotten damp. Detergent residue in the dispensing drawer. Store detergent in a closed and dry place. Do not keep them under high temperatures. Water pressure might be low The detergent in the main wash compartment might have gotten wet while taking in the prewash water.. Detergent might be mixed with the bleaching agent. Excessive laundry might have been loaded in.
The plug might not be plugged in the mains outlet. Fuse may have blown. Machine does work. Nothing is displayed on Electricity may be cut the screen. off. The “On/Off” button might have not been pressed. The machine did not start after the program The front door may be was selected and the ajar. «Start/Pause/Cancel» button was pressed. The Rinse Symbol amongst the Program Indicator Symbols is flashing. (Subject to the Water may have been model of your machine, cut off.
2820520340_EN/250808.
