Operating Instructions TV Spheros R 37 Spheros R 32 233–32478.021 Spheros R 26 Downloaded From TV-Manual.
Contents Remote control - TV functions Control units Spheros R 26 and R 32 Control unit Spheros R 37 Connections to rear panel - Spheros R 26 Connections to rear panel - Spheros R 32 and R 37 Welcome Integrated features Scope of delivery Transporting Installation options Note on the LCD screen Cleaning Disposal For your safety First installation Remote control Connection Handling the fabric hose Using the conditional access module Switching on Automatic programming Directing DVB-T antenna Daily operation Sw
Remote control - TV functions Control LED for programming the remote LED TV DVD STB VCR Change-over switch for operating of TV, VCR, DVD recorder/player or Set Top Box Switch on/off - on standby Sound off/on -Set Call timer list Picture menu on/off (1 Sound menu on/off -List REC-MENU Menu "Additional functions" on/off RADIO Set picture format Electronic Programme Guide (EPG) on/off abc def ghi jkl mno pqrs tuv wxyz AV PIP DVD-AV EPG Show/hide menu Teletext on/off (3 -M SC DI P+
S P H E R O S Control units Spheros R 26 and R 32 Display: red = standby green = operation orange = operation without screen display (radio mode, EPG data capture or timer recording) Call the menu, in the menu: up Switch TV set on/off to standby Station up, in the menu: right Station down, in the menu: left DR+ (1 Radio on/off (back to TV mode), switching on the radio from standby, in the menu: down (1 (2 Radio only for DVB reception, provided the station broadcasts this.
S P H E R O S Control unit Spheros R 37 Display: red: standby green: operation green and red: timer recording, EPG data capture or radio mode Common Interface (CI-Slot) Headphones connection S-VHS connection (AVS) (i.e. for camcorders) Video input (AVS) Audio input right Audio input left Call the menu, in the menu: up/down Station down, in the menu: left Station up, in the menu: right Downloaded From TV-Manual.
Connections to rear panel - Spheros R 26 Common interface (CI-Slot) Headphone connection S-VHS connection (AVS) (i.e.
Connections to rear panel - Spheros R 32 and R 37 Common Interface (CI-Slot) Headphones connection S-VHS connection (AVS) (i.e. for camcorders) Video input (AVS) Audio input right Audio input left Call the menu, (2 in the menu: up/down Station down, (2 in the menu: left Station up, (2 in the menu: right – + ANT-SAT 13/18V /350mA ANT-TV /80mA 89374.
Welcome Thank you! Transporting At Loewe, we combine the highest standards of technology, design and user friendliness. This applies equally for TV, video and accessories. Your new TV set is ideally equipped for the TV standard of the future - "HDTV" (High Definition Television). With its high-resolution screen and the future-proof digital interfaces HDMI, you have the option to view HD content with excellent picture quality. It therefore carries the European quality mark "HD ready".
Welcome Note on the LCD screen The TV set with an LCD screen you have purchased meets the highest quality requirements and has been tested for pixel errors. Despite the utmost caution in production of the displays, it cannot be totally ruled out that some of the pixels might be defective for technological reasons. Please understand that such effects cannot be considered a unit defect as defined by the warranty as long as they are within the limits specified by the standard.
For your safety For your safety and to avoid unnecessary damage to your TV set, please read and observe the following safety instructions: • This TV set is designed exclusively for reception and reproduction of video and audio signals. • This equipment is designed for domestic and office environments and must not be used in rooms with high humidity (e.g. bathroom, sauna) or high concentrations of dust (e.g. workshops).
First installation Remote control Connection Batteries Power mains To insert or change the batteries, press on the arrow. Slide the battery compartment cover downwards and remove it. Insert LR 03 alkaline-manganese batteries (AAA) and ensure that the + and - ends are positioned correctly. Remove the cover for the connections. Connect the TV set to a 220-240V/50- 60 hertz power outlet.
First installation If a Digital Satellite Tuner 1 has been retrofitted, connect your satellite antenna system to the ANT-SAT socket. If a Digital Satellite Tuner 2 has been retrofitted, connect one antenna cable each, for example from the antenna switch or from the twin LNC, to both SAT sockets. When laying the cable, use the cable clips affixed beneath the TV set. Replace the connection cover on the TV set.
First installation Automatic programming Automatic programming of the TV set is started the first time you switch it on. Follow the menus. OK OK By pressing in one of the arrow directions, you can choose the settings ... ... and confirm your settings by pressing OK. You then go to the next menu. Back to the previous menu. 1. First you have to select the menu language. 2. By pressing the OK button, you can call the menu "Connect antenna cable(s)".
First installation Daily operation Directing DVB-T antenna Switching on/off Note: not with DVB-T stations in GB. If you use a room antenna to receive one or more DVB-T stations that have picture and sound interference, then you should change the location of where the antenna is set up. To help you direct your antenna or to help you determine the most suitable location to set up the antenna, your TV set has a display for the signal quality C/N and the signal strength Level.
Daily operation Changing stations ... via the station list ... with the P+/P- buttons on the remote control OK Use OK to call the station list. P+ V- OK Stations up/down V+ P– When changing, the station display is visible for a few seconds. 41 ZDF Eifellandschaft Language/sound selection 21:00 – 21:45 If additional languages are broadcast with DVB stations, then the set displays the language/sound selection under the station display.
Daily operation Basics about the menu operation TV menu Sound Bass 6 Menus are called via the MENU button or via the button for special menus and can be hidden by using these buttons or by using the END button. The menu is displayed in the bottom section of the screen. At the top, you can see additional information for the menu point selected. In the menus, navigate by using the cursor . You can make settings by using . When you exit the menu, the settings are adopted.
Daily operation For the info system ... OK Call the TV menu. OK Select "Settings". to select the line below, for example "Search wizard". Search wizard Use this menu to search for stations automatically once certain settings have been made. If you want to search for stations with other than the displayed settings, select the "Change settings" menu. For each menu point, an info text is displayed at the top of the picture to help you with the setting.
Daily operation For the index ... For example, you want to have the TV set switch off automatically: Select the index item "Switch off" – "Automatic". Using the index, you can access many operational functions directly. You can also find a great deal of information on technical terms about television. Before the alphabetical sorting, you can find the menu language option, the list of features integrated into the TV set and the repeat initial installation option.
Daily operation Setting the sound Picture settings Open the Picture menu Volume and other frequently used sound settings Picture Picture adjustment normal P+ V– OK V+ Setting the volume Volume 24 P- OK by using ... OK or OK, you can call other sound settings ... Volume 24 OK and select using Volume OK OK Sound adjustment Sound effects Loudness use for the related selection/setting... normal Sound adjustment Pop ...
Operating modes – TV TV In initial installation and daily operation, the TV set is in TV mode. This is also the case when none of the other modes of operation, such as EPG, Teletext, PIP or Radio, have been selected. Each of these operating modes has a separate menu with separate functions for the coloured keys. Call the menu via the MENU button. timer) that can be selected in the "TV menu – Settings – Miscellaneous – Onscreen displays".
Operating modes – TV TV menu Call additional functions Select additional functions such as Image+ ✳, Teletext subtitles, Personal teletext pages, Headphone volume, Scan stations and to move the picture up and down. Teletext subtitles ... Personal teletext pages Call timer overview If timer recordings have been programmed, you will see when which station is recorded here. Timer list Fri 12.09./14:12 12.09.
Operating modes – TV Under "Settings" you will find the following functions: Stations Here you can search for and store new stations automatically or manually. With "Change stations", you can rearrange and delete the stations and change station names (not for DVB-T stations in GB). • Search wizard • Manual adjustment • Change stations Parental lock You can lock the TV "immediatley", "daily" for a certain period of time or "agerelated" for DVB programmes with age restrictions.
Operating modes – TV Removing the CA module Searching for new software 1. Switch the TV set off with the mains switch. 2. Remove the cover from the back of the set on the upper left. 3. Press the eject button at the module slot; the module is unlocked. 4. Remove the module from the set. If you want to carry out a manual search for new software, proceed as follows: 1. Call the TV menu using the MENU button. CA module Inserting a new CA module CI-Slot 2. Confirm the "Settings" using OK. 3.
Operating modes – TV Image+ Image+ demo mode Image+ is a picture improvement specially developed by Loewe, which delivers a sharper, lifelike and colour-fast picture richer in detail and contrast. Image+ is only integrated in Spheros R 32 and Spheros R 37. In order to show the way Image+ works, a "Demo mode" is integrated. In "Demo mode", the current picture is divided into two parts. The left half of the picture is shown in "normal" mode, the right half in the Image+ optimised mode.
Operating modes – PIP Picture in picture (PIP) Select the station of the TV picture (main picture) Note: The coloured keys do not work as described below with DVB-T stations in GB, but they operate as described on page 30 (Digital Teletext). The bar/frame has to be white. If not, press the green coloured key. Then select the station as usual. Picture in picture displays are possible if the set has an analogue PIP tuner or a digital satellite tuner in addition to the analogue TV cable tuner.
Operating modes – PIP Functions in the PIP menu Position of the PIP picture In the PIP menu, you can set the PIP type (small picture or split screen) and the position of the small picture. MENU OK Call the PIP menu (PIP must be active, green bar/frame) mall PIP TV menu Settings PIP Type Split screen INFO Move the PIP picture with the arrow keys to a corner of the TV picture.
Operating modes – EPG EPG - Programme guide EPG is an electronic programme guide. With this system, you can easily find the programmes that interest you (sorted according to day, time, stations and topics). You can mark programmes and programme recordings. Depending on whether you are receiving analogue stations by cable/antenna or digital stations, you will have different programme guides. A wizard is activated the first time you use EPG (not with DVB) which guides you through the necessary settings.
Operating modes – EPG In front of the programme’s title, the system places an ✓ . This station is switched later to this programme when the set is switched on. If the TV is off, it switches on again automatically at the beginning of the marked programme if this has been set in the EPG menu. If you are out, a security prompt prevents the TV set staying on unattended. Before leaving the upper selection lines using the blue coloured key, select a specific line.
Operating modes – Teletext Analogue Teletext OK In Multiple pages scroll using . You can see which multiples pages can be called in the bottom menu line. Teletext transmits information such as news, weather, sports, programme previews and subtitles. TEXT – Teletext on/off INFO 100 100 ARD-Text 10.09.04 ARD TEXT Teletext im Ersten 14:14:42 Index > 101 Bulmahn: Bildung statt Eigenheim . . . . . . . . Wird auch der Nahverkehr teurer? . . . . . . . . Australien: Keine Zugeständnisse . . . . . . . .
Operating modes – Teletext Programme timer recordings Digital teletext operation (only for MHEG-5 device versions) A video and/or DVD recorder must be connected and logged in in the connection wizard. Call the programme pages of the current station in teletext mode using the Direct recording button . Scroll to the teletext page in which the programme to be recorded is listed if necessary. Select the programme you want to record by with and confirm with the OK button.
Operating modes – Radio Radio Radio menu Radio stations can only be received via DVB. If you do not have any DVB radio reception, you can play a sound signal from an external device using the TV set via the sound/AV inputs. RADIO Use the RADIO button on the remote control or the R on the control ring of the TV set to switch the radio on or off.
Operating additional equipment Login and connect equipment You have logged in and connected all connected equipment in the initial startup. If you want to connect other equipment or disconnect equipment, call the connection wizard. MENU Call up the TV menu OK Select "Connections" OK Select the submenu line OK Select "New devices/modifications" and ... OK Call with OK. State what equipment you want to connect. State whether a piece of audio equipment is to be connected (more details as of page 35).
Operating additional equipment Video playback Timer recording with video or DVD recorder There are several ways to see the picture and hear the sound of the VCR, DVD player/recorder or camcorder on your TV: You can programme timer recordings on the TV set. Programming can be done with the EPG programme guide (not with DVB-T in GB), teletext or manually. Call the "Timer list" menu with the button and press the red coloured key for the "Recording wizard".
Operating additional equipment Assignment of digital audio inputs and outputs Audio input "AUDIO DIGITAL IN" The TV set has a coaxial digital audio input "AUDIO DIGITAL IN" and a coaxial digital audio output "AUDIO DIGITAL OUT". If you are using an external digital surround amplifier for sound reproduction, you have to feed digital audio signals to the TV, e.g. from the DVD player. Audio output "AUDIO DIGITAL OUT" The digital audio signal is applied at the "AUDIO DIGITAL OUT" socket of the TV.
Operating additional equipment Connecting Loewe DVD Preceiver Auro 2216 PS and Individual Sound loudspeaker system You can play audio signals from the TV or DVD player in cinema quality with these components. The Individual Sound system includes 5 speakers for the front, centre and surround reproduction in addition to the subwoofer illustrated below. The centre signal can be reproduced alternatively by the TV speakers.
Operating additional equipment Connecting other audio amplifiers or active speakers In the connection wizard, select "HiFi/AV amplifier" under "Equipment selection: audio component". The connection wizard allows configuration of different audio amplifiers (stereo amplifiers, surround amplifiers, analogue or digital) with different sound formats (Dolby Digital, dts, MPEG and Stereo/PCM). Refer to the operating instructions for the audio amplifier to be connected.
Operating additional equipment HDMI (DVI) connection VGA/XGA connection The HDMI connection (High Definition Multimedia Interface) allows digital picture and sound transmission via a connecting cable, e.g. from Loewe DVD Recorder Centros 2102/2172 HD. The digital picture and sound data are transmitted without data compression and therefore lose none of their quality. In the equipment connected, no analogue/digital conversion is necessary, which might also have lead to losses in quality.
Operating additional equipment Sound from PC or Set Top Box Feed the analogue audio signal from the PC or the STB to the sockets AUDIO IN L/R on the TV via a cinch cable. The sound is reproduced via the TV speakers. If you have connected a digital external audio amplifier, you can select the digital audio signal in the connection wizard (TV menu - Connections - New devices/modifications) and assign it to the VGA/XGA socket.
Operating additional equipment Operating other Loewe devices with the RC3 remote control Using this remote control, you can operate additional devices from Loewe. TV Use the rotary switch to select VCR, TV or a Set Top Box. DVD STB The following are preset at the factory: Loewe VCRs, Loewe TV VCR sets and for STBs (Set Top Box) in Germany, the common d-box.
Operating additional equipment Using the RC3 remote control to operate a DVD recorders or DVD player DVD VCR TV STB Set the rotary switch to "DVD". Using the RC3 remote control to operate a VCR DVD The infrared code and the functions are preset at the factory for the Loewe DVD recorder Centros 21x2 HD. VCR TV STB Set the rotary switch to "VCR". The infrared code and the functions for a Loewe VCR are preset at the factory.
Operating additional equipment Rotating the TV set for Spheros R 32/37 Rotate TV Basic adjustment -31 Spheros R 32/37 have a connection for a rotating stand control. If the TV set is mounted on a motor unit, you can use the remote control to adjust it to your seating location accordingly. OK OK Rotate the TV set when no menu or PIP is being displayed. Note: Make sure there are no objects in the TV’s area of rotation that might obstruct the rotation or be knocked down due to the rotating motion.
What to do, if ... Problem Possible cause Remedy The "Recording" menu point is not displayed in the TV menu. No video or DVD recorder logged in. Log in the video or DVD recorder in the connection wizard and connect the device. "Connections" cannot be called in the TV menu (deactivated). A time recording is in progress. Wait until the timer recording has ended or delete the timer. The control of the Loewe video recorder and the timer do not work or do not work properly.
What to do, if ... Problem Possible cause Remedy Digital Link Plus does not function. a) Euro-AV cable is not fully wired (pin 10 not wired). a) Replace the Euro-AV cable. b) Some recorders can only adopt stations during the initial installation of the TV set. b) Restore the recorder to the as-delivered state (see recorder’s operating instructions). c) All or some of the terrestrial and cable stations are stored on station storage locations ≥ 99.
Technical data General data Type Spheros R 26 Spheros R 32 Spheros R 37 Item no. 65435xxx 65436xxx 65437xxx Versions DVB-T CI (MHEG-5) Versions DVB-T/C CI Versions DR+ DVB-T CI (MHEG-5) Versions DR+ DVB-T/C CI • • – – • • • • • • • • Set dimensions without stand (ca. cm WxHxD) Dimensions with stand (ca. cm WxHxD) 68,4x50,7x10,8 68,4x56,1x35,0 84,5x58,5x9,0 84,5x64,0x40,0 99,0x67,5x9,0 99,0x71,6x40,0 Set weight without stand (ca. kg) Set weight with stand (ca.
Technical data Electrical data Chassis name Power supply Tuner VHF/UHF/ cable Hyperband 8 MHz Station storage locations TV standards Connections L 2650 220 V -240V/50- 60 Hz Colour standard Sound standard Rated audio power Analogue Teletext Page Memory Digital Teletext (only for MHEG-5 device versions) 41 MHz to 860 MHz 1680 B/G, I, L, D/K, M, N DVB-T, DVB-C✳, DVB-S✳ SECAM, PAL, NTSC, NTSC-V, PAL-V (60Hz) Mono/Stereo/Dual-channel Nicam B/G, I, L, Virtual Dolby 2 x 20 watt TOP/FLOF Level 2.
Accessories Wall holders and stands Loewe DVD players and recorders Refer to the notes on the installations options on page 8. The DVD players and recorders from Loewe are characterised by form and colour, which match Loewe TV sets, adapted user guidance and technology. A combination of the two devices forms a system which offers many advantages. PIP tuner The PIP tuner enables picture in picture displays (PIP) for analogue terrestrial and cable reception.
Accessories Retrofitting options The following table shows the equipment and retrofitting options for the individual device versions. Device version / Equipment Item no.
Service Loewe Austria GmbH Parkring 10 1010 Wien, Österreich Tel.: +43 - 810/0810-24 (zum Ortstarif) E-Mail loewe@loewe.co.at International Dynamics Australasia Pty Ltd. 129 Palmer Street Richmond 3121, Victoria, Australia Tel. +61 - 3 - 94 29 08 22 Fax +61 - 3 - 94 29 08 33 Email mail@internationaldynamics.com.au Loewe Opta Benelux NV/SA Uilenbaan 84 2160 Antwerpen, België Tel. +32 - 3 - 2 70 99 30 Fax +32 - 3 - 2 71 01 08 Email ccc@loewe.be Telion AG Rütistrasse 26 8952 Schlieren, Schweiz Tel.
Codelist RC3 / Lista de códigos RC3 Loewe DVD-Player DVD-Recorder Centros 11x2 DVD-Recorder Centros 21x2 STB VCR 0539 0741 1463 1127 0866 DVD 3DLAB A-Trend Acoustic Solutions AEG Aiwa Akai 0790 0788 0690 AKI Akira Alba 0717 0699 All-Tel Amitech Amstrad Apex Digital Audiosonic AWA Black Diamond Blaupunkt Blue Sky 0699 0695 Boman Brain Wave Brandt Bush 0699 0713 0818 C-Tech Cambridge Audio Cambridge Soundworks CAT Celestial Centrex Centrum cineULTRA Classic Clatronic Clayton Coby Conia Crown Cybercom CyberH
Codelist RC3 / Lista de códigos RC3 Supervision 0730 0768 SVA 0672 Synn 0768 Tandberg 0713 Tatung 0770 Teac 0717 0741 0571 0768 0591 0790 Technics 0490 1908 Technika 0770 Techwood 0713 Tensai 0690 0651 Tevion 0651 0768 Theta Digital 0571 Thomson 0551 0522 Tokai 0665 0788 Tokiwa 0705 0716 Toshiba 0503 Umax 0690 United 0788 0730 0790 Universum 0741 0713 0591 Venturer 0790 Vieta 0705 Voxson 0730 0831 Walkvision 0717 Welkin 0831 Wesder 0699 Wharfedale 0696 0723 Windy Sam 0573 XBox 0522 XLogic XMS Yamada Yamaha
Codelist RC3 / Lista de códigos RC3 Micormay 0348 Micromaxx 0209 Migros 0000 Mitsubishi 0043 0067 0081 Multitec 0037 Multitech 0000 0072 0104 Murphy 0000 Myryad 0081 NAD 0104 National 1562 0226 NEC 0041 0038 0067 0104 0037 Neckermann 0041 0081 Nesco 0072 0000 0352 Neufunk 0209 Nikkai 0072 0278 Nokia 0104 0106 0315 0041 0278 0240 0048 0042 0081 Nordmende 0041 0384 0320 0067 NU-TEC 0209 0348 Oceanic 0000 0048 0106 0081 0104 0041 Okano 0315 0209 0348 0072 0278 Orbit 0072 Orion 0209 0352 0348 Orson 0000 Osaki 0
Codelist RC3 / Lista de códigos RC3 Diskoverer 0605 0157 Diskovery 0668 0710 Diseqc 0710 Distratel 0084 0885 1205 Distrisat 0200 DMT 1075 DNT 0200 0396 DREAM multimedia.
Codelist RC3 / Lista de códigos RC3 Smart 1075 0132 0299 1101 0396 1113 0115 0282 0847 0853 Sony SR Starland Strong 0879 0853 1105 1159 Sunsat Sunstar Tantec Tatung Teac Tecatel TechniSat 0200 1099 1100 0501 Technosat Technowelt 0607 Techsan Techwood Telasat 0605 0115 Teleciel Telecom Telefunken Teleka 0396 0750 0501 0607 Telesat 0605 Telestar 0501 1099 1100 0200 Teletech Televes 0455 0501 Thomson 0455 0713 0853 0115 12910820 0668 0710 Thorn Tokai Tonna 0455 0668 0501 0713 Topfield Toshiba TPS 0820 Triasa
Downloaded From TV-Manual.
