Technical data

Operation
Data Display DD109 15
14.3.1 Selection fields
• Options for selection of the parameters
 - Selection field for deselected point
 - Selection field for selected point
• Selection of the selection field via the "arrow up“ and
"arrow down“ keys
• By means of the "Enter“key the selected option can be activated
• Leaving the menu point:
Use the "Back“ key to get back to the last menu level without
activating the selected option
14.3.2 Figure settings
Example figure settings:
Time and date setting in submenu "system status and setting"
1. Time setting via "arrow up" and "arrow down" keys
2. Change from HOUR to MINUTE to SECOND with the "Enter“ key
3. Upon entry of the SECONDS the setting is terminated and
stored by the "Enter“ key.
By using the "Back" key the menu point "Time and date
setting" can be left without storing the settings.
14.4 Information after switching on the instrument
System information are indicated for approx. 5 seconds after
switching on the data display:
The system information is helpful for service questions in order to
determine e. g. the version number and the firmware version.
The system information can be called up at any time in the menu
point "system info".
If the sensors are connected in accordance with the configuration
the data display will automatically recognize them and start to
indicated real time measured values which are received from the
sensors. It is possible that measured values are indicated on more
than one page. The "arrow up" or the "arrow down" key can be used
in order to indicate a further page.