Instruction Manual

P
Display
mode
E
E
P
E E
P E P E
Security Code
Enter code by
pressing
and
to move to next
digit. Code 0000
allows direct
access to
the menu
P
E
P E
E
Resolution
or
to select
resolution
of least
significant
digit
Decimal point
or
to select
position of
dummy
decimal
point
P E
P E P E
P E
When fitted alarm
functions appear here
E
Calibration using
external current source
(Preferred method)
With accurate 4mA input current
set required zero display by
pressing or and
to move to the next digit
Similarly, using accurate 20mA
input current set required
full scale display
Any current between 4 and
20mA may be used providing
difference is > 4mA
E
P E
P
P E
P E P E
E
Calibration using
internal references
(Input current may be any value)
Using 2Ero function set required
display at 4mA by pressing
or and
to move to the next digit
Similarly, using 5PAn function set
required display at 20mA
E
P
P E
P E P E
E
Select type of bargraph display and define
start and finish relative to digital display
Using the tYPE function select required bargraph
justification by pressing or
Using the bArLo function set the digital display
at which the bargraph is required to start by
pressing or and to move to the
next digit. Similarly using the bArHi function set
digital display at which the bargraph is required
to finish
E
P E
E
P
P E P E
P E
EEEE
Define
Security Code
Enter by
pressing
or
and
to move to
next digit
Reset indicator
configuration
Press
or
to select ConF
to reset
indicator or
LtAb to
reset lineariser
to default
configuration.
Confirm selection
by entering 5urE
by pressing
or
and
to move to
next digit
Function of (
button in
display mode
Press
or
to toggle
between
4-20mA and
% of span
Tare Function
Press
or
to turn tArE
on or oFF
P
P
Function
or
to select
5td
for standard
function.
root
for root
extractor.
lin
for lineariser
Fig 5 Configuration menu
4. CONFIGURATION
Indicators are supplied calibrated as requested when ordered, if not specified default configuration will be supplied but can easily be changed on-site.
Fig 5 shows the location of each function within the configuration menu with a brief summary of the function. Please refer to the full instruction manual for detailed configuration
information and for a description of the lineariser and the optional dual alarms.
Access to the configuration menu is obtained by pressing the ( and ) buttons simultaneously. If the indicator security code is set to the default 0000 the first parameter FunC will
be displayed. If the indicator is protected by a security code, CodE will be displayed and the code must be entered to obtain access to the menu.
Old Charlton Rd, Hitchin, Hertfordshire, SG5 2DA, UK
Tel: [phone] Fax: [phone]
e-mail: [e-mail] web: www.beka.co.uk
Only in BA324G
and BA324G-SS menus
Manuals, certificates and data-
sheets can be downloaded from
http://www.beka.co.uk/lpi1/
The BA304G, BA304G-SS,BA324G & BA324G-SS are CE marked to show compliance with the European Explosive Atmospheres Directive 2014/34/EU and the European EMC Directive 2014/30/EU.
They are also UKCA marked to show compliance with UK statutory requirements Equipment and Protective Systems Intended for Use in Potentially Explosive Atmospheres Regulations
UKSI 2016:1107 (as amended) and with the Electromagnetic Compatibility Regulations
UKSI 2016:1091 (as amended).
Fig 5 Conguration menu