User Guide
5. Installation
BA390X and BA390XS lamps require a single 22.5mm
diameter mounting hole and may be closely grouped as
shown in Fig 7. The lamps are supplied with a gasket
to seal the joint between the lamp body and the panel in
which it is mounted. When correctly installed the front of
the lamp provides IP66 protection and may be cleaned
with a low pressure hose.
The rear of the lamp body has IP20 protection, but this
can be increased to IP66 using the BA599 rear sealing kit
which includes a gland to support the cable.
31
31
31
Single fixing
hole 22.5mm
±0.2mm
Fig 7 Fixing centres for maximum packing density
6