User Guide

The REST
HOW TO USE
PLEASE NOTE:
The Beiter Rest can not have unlocked screws! The only moving part is the Spindle: without the
inserted Rest Tool, the spindle can no longer move!
The finger may - especially at the beginning - wear: this may be compensated with the height
adjustement. If the wear is too extreme, the Finger can be exchanged easily, precisely and quickly.
If used under extreme conditions (e.g. A too high or too low nocking point, or a not precise tuning
causing clearance problems), the Finger may wear faster, than with a correct set-up.
CHANGING THE FINGER:
You may easily change from Aluminum to Carbon and back,
finding always again exact the same position: simply change
from the finger “12” to “23” and vice-versa.
Another reason o change the Finger, may be the fact that the
Finger brakes or wears due to an incorrect tune. A small
groove may be compensated with the height adjustement.
IMPORTANT!
Every Finger is produced out of a single mould, so each Finger is identical
to the other!
To exchange the Finger, insert the Beiter Rest Tool completely into the
Spindle (for LH without the sleeve, if there is not enough space), and turn
clockwise (to the right pic. 11) until the Finger is not anymore guided by
the Spindle and touches the sleeve. Extract the Finger while the Spindle
will stay clipped on the Support.
Now insert the Finger in the Support, positioning it into the lower guide (pic. 12) and clipping it on the
upper guide like a push-botton (pic. 13). Insert the Beiter Rest Tool again completely into the Spindle
and press simultaneously against the Finger with it and tourn counter-clokckwise (to the left, pic. 14)
to engage the dirst thread.
Left-Hand archers must push with their finger against the Finger to engage it.
Now you can move the Beiter Arrow Rest Finger in the desired position!
pic. 12
pic. 11
pic. 14
pic. 13
www.WernerBeiter.com
Tel. [phone]
Fax [phone]
email: [e-mail]
Werner Beiter
Daimlerstr. 18
DE-78083 Dauchingen
Update 01/2004
Code# Description
RE76661512065 Rest, Finger 15-12-0,65
RE76661617065 Rest, Finger 16-17-0,65
RE76661723077 Rest, Finger 17-23-0,77
RE7666151206510 Rest, Finger 15-12-0,65, 10 pcs.
RE7666161706510 Rest, Finger 16-17-0,65, 10 pcs.
RE7666172307710 Rest, Finger 17-23-0,77, 10 pcs.
RE7666S1 Rest, Support #1, incl. Glue Strip
RE7666S2 Rest, Support #2, incl. Glue Strip
RE7666S3 Rest, Support #3, incl. Glue Strip
RE7666SP Rest, Spindle
RE7666KL Rest, Glue Strip
RE7687 Rest Tool
BEITER REST SPARE PARTS