Product Card

"Connect" to automatically connect.
Note: This feature is only available on Android devices
4). WPS One-click Connection
a) Turn on the "WPS" function in the settings of your phone or other device you
want to connect.
b) Click the "I want to connect " button at the bottom right of Mobile WiFi
device`s screen to enter the connection mode selection page
c) Select "WPS connection" to enter the WPS network operation page, and click
the " " button to activate the WPS network function of Mobile WiFi device
d) Yourphone or other device should automaticallyfind the network. After the
confirmation prompt pops up on your phone or other device, click "OK" to
connect to the network.
Note: i）This feature is only available on Android devices
4. Use of SIM card slot
1) Mobile WiFi both support "Physical SIM ”mode and "Virtual SIM ”mode. You can
change the setting by navigating to "Home"-> "Network "->" SIM Card Mode ".
2) In the" Physical SIM ” mode, a SIM card must be inserted to use the Mobile
WiFidevice. Some SIM cards also need an APN to be setup, which should be setup on
the WebUI or App. The external card slot does not support switching SIM cards when
the Mobile WiFidevice is on. If you need to use a SIM card, restart theMobile
WiFideviceafter inserting or extracting an external SIM card.
3) In the "Virtual SIM ”mode, there is no need to insert a SIM card into the external card
slot. You can purchase a data package through the UROCOMM App, and you can
connect to a local network by turning on theMobile WiFi device when you arrive at your
destination.
5. Device Management
1）Scan the QR code below to download the Urocomm app. With the app you can
easily buy data packages, manage your data,change passwords, set up your device,
restart your device, and more.