Product Card

Power Off Status
Pulsing Red
Light
Charging，Low
Battery
Pulsing
Yellow Light
Charging，Medium
Battery
Pulsing
Green Light
Charging，High
Battery
Continuous
Green Light
ChargingCompleted
System Status
Continuous Green Light
System Starting Up
Pulsing Yellow Light
SoftwareUpgrade With System Start-
up
Pulsing Red Ligh
System Shutdown
3. How to connect a device to yourMobile WiFiNetwork
1）WiFi Network Manual Connection
a) Find the SSID and KEY displayed on the bottom label of the Mobile WiFi device
b) Enter the SSID and KEY found on the network connection of your phone or
other device you want to connect to successfully connect to the network.
Note: If the SSID and KEY displayed on the bottom label of the device are worn
off and cannot be viewed clearly, you can start the Mobile WiFidevice and view it
in "Home"-> "Network"-> "WLAN"
2). Code ScanConnection (Camera Scanning / Wechat Scanning)
a) Start up yourMobile WiFidevice and enter the homescreen
b) Click the "I want to connect " button at the bottom right of the screen to enter
the code scanning page
c) Open your phone or other device’s camera scanner or WeChat to scan the
corresponding QR code
d) After the scan is completed, your phone or other device will automatically
connect to the network.
Note: WeChat‘s scan code function can also be used to scan the Ucode QR code
on the label on the back of the Mobile WiFidevice
3).NFC Touch Connection
a) Turn on the NFC function of your phone or other device you want to connect
b) Hold your phone or otherdevice to the front bottom area of the Mobile
WiFidevice
c) After the connection prompt pops up on your phone or other device, click